TWiki Reference Manual (TWiki-6.1.0, Mon, 16 Jul 2018, build 30610)

This page contains all documentation topics as one long, complete reference sheet.

Related Topics: TWikiSite, TWikiHistory, TWikiEnhancementRequests, UserDocumentationCategory, AdminDocumentationCategory

TWiki System Requirements

Server and client requirements

Low client and server base requirements are core features that keep TWiki widely deployable, particularly across a range of browser platforms and versions. Many Plugins and contrib modules exist which enhance and expand TWiki's capabilities; they may have additional requirements.

Server Requirements

TWiki is written in Perl 5, uses a number of shell commands, and requires RCS (Revision Control System), a GNU Free Software package. TWiki is developed in a basic Linux/Apache environment. It also works with Microsoft Windows, and should have no problem on any other platform that meets the requirements.

Resource	Required Server Environment *
Perl	5.10.1 or higher
RCS	5.7 or higher (including GNU diff) Optional, TWiki includes a pure Perl implementation of RCS that can be used instead (although it's slower)
GNU diff	GNU diff 2.7 or higher is required when not using the all-Perl RcsLite. Install on PATH if not included with RCS (check version with diff -v) Must be the version used by RCS, to avoid problems with binary attachments - RCS may have hard-coded path to diff
GNU df	Used by the site statistics to record disk usage statistics, optional. The df command is pre-installed on Linux and OS-X. On Windows install the CoreUtils for Windows.
GNU patch	For upgrades only: GNU patch is required when using the TWiki:Codev.UpgradeTWiki script
GNU fgrep, egrep	Modify command line parameters in configure if you use non-GNU grep programs
zip	Zip archive command line utility. Used by the BackupRestorePlugin to create and restore from backups.
Cron/scheduler	• Unix: cron • Windows: cron equivalents
Web server	Apache is well supported; see TWiki:TWiki.InstallingTWiki#OtherWebServers for other servers

Required CPAN Modules

Most of the CPAN libraries listesd below are part of a standard Perl installation so you most likely have them all!

See TWiki:TWiki.HowToInstallCpanModules for detailed information on how to install CPAN libraries

The following Perl CPAN modules are used by TWiki:

Optional CPAN Modules

The following Perl modules may be used by TWiki:

See TWiki:TWiki.HowToInstallCpanModules for detailed information on how to install CPAN libraries

Most of them will probably already be available in your installation. You can check version numbers with the configure script, or if you're still trying to get to that point, check from the command line like this:

perl -e 'use FileHandle; print $FileHandle::VERSION."\n"'

Client Requirements

The TWiki standard installation has relatively low browser requirements:

• HTML 3.2 compliant
• Cookies, if persistent sessions are required

CSS and Javascript are used in most skins, although there is a low-fat skin (Classic skin) available that minimizes these requirements. Some skins will require more recent releases of browsers. The default skin (Pattern) is tested on IE 6, Safari, and Mozilla 5.0 based browsers (such as Firefox).

You can easily select a balance of browser capability versus look and feel. Try the installed skins at TWikiSkinBrowser and more at TWiki:Plugins.SkinPackage.

Important note about TWiki Plugins

• Plugins can require just about anything - browser-specific functions, stylesheets (CSS), Java applets, cookies, specific Perl modules,... - check the individual Plugin specs.

Related Topics: AdminDocumentationCategory

Back to top

TWiki Installation Guide

The following is installation instructions for the TWiki-6.1 production release on an Apache web server on Linux. Visit TWiki:TWiki.InstallingTWiki for the latest updates to this guide and supplemental information for installing or upgrading TWiki, including notes on installing TWiki on different platforms, environments and web hosting sites.

If you are upgrading from a previous version of TWiki, you probably want to read TWikiUpgradeGuide instead.

Preparing to install TWiki

Before attempting to install TWiki, you are encouraged to review the AdminSkillsAssumptions. This guide assumes you have, at a minimum, basic knowledge of server administration on the system on which TWiki is to be installed. While it is possible to install TWiki with FTP access alone (for example, on a hosted site), it is tricky and may require additional support from your hosting service (for example, in setting file ownership and installing missing Perl CPAN libraries).

To help setup a correct Apache configuration, you are very much encouraged to use the automatic tool TWiki:TWiki.ApacheConfigGenerator which generates the contents for an Apache config file for TWiki based on your inputs.

While this installation guide specifically describes installation on an Apache web server on Linux, TWiki should work fine with any web server and OS that meet the system requirements (see below). For additional notes on installing TWiki on other systems, see TWiki:TWiki.InstallingTWiki#OtherPlatforms.

If you are installing TWiki without Unix/Linux root (administrator) privileges (for example, on a hosted domain), see "Notes on Installing TWiki on Non-Root Account" below for supplemental instructions to the basic steps presented below.

If you are upgrading from an earlier major version of TWiki such as Cairo (TWiki-3) or TWiki 4.x you will need the information found at TWikiUpgradeGuide.

One of the more difficult tasks is installation of additional CPAN libraries. See TWiki:TWiki.HowToInstallCpanModules for detailed information on how to install CPAN libraries.

If you need help, ask a question in the TWiki:Support.WebHome web or on TWiki:Codev.TWikiIRC (irc.freenode.net, channel #twiki).

Basic Installation

1. Download the TWiki distribution from http://TWiki.org/. (Example - download TWiki-6.1.0.tgz for Linux)
2. Copy the downloaded package into the directory where you want to install TWiki (Example: /var/www). Unpack the distribution in it (Example: tar xvfz TWiki-6.1.0.tgz). The unpack will create a directory called twiki which contains the TWiki package. In the rest of this document we assume this directory is called twiki.
   • Note: TWiki does not allow spaces in directory names. Especially on Windows make sure to use a directory path without spaces.
3. Setup access file and directory rights to enable the webserver user (the user Apache runs the CGI scripts as) to read and write inside the twiki directory.
   • Warning: Do not just run a chmod -R 770 twiki. The access rules have different meaning for files and directories. This is the most common mistake installers make.
   • The distribution tgz has the file and directory access rights setup to work with a reasonable security level that will work for all types of installations including shared hosting.
   • The ownership of the twiki directory tree is normally set to the user that unpacked the tgz and will have to be changed to the webserver user using the command chown -R user:group /path/to/twiki. The webserver username varies from Distributions. Examples for some major distributions:
     • RedHat, Fedora, CentOS, Gentoo, Mandriva : chown -R apache:apache /path/to/twiki
     • debian/Ubuntu/Kubunto : chown -R www-data:www-data /path/to/twiki
     • Suse : chown -R wwwrun:www /path/to/twiki
   • If you mistakenly change the access rights in a way that makes TWiki stop working, simply run the script found at TWiki:TWiki.SettingFileAccessRightsLinuxUnix to set the access rights of the entire TWiki tree back to the defaults in the distribution.
   • It is possible to define tighter access rules than the ones given by default after the installation is complete. But how tight they should be depends on your distribution and local needs. Typically you may want to limit all access from world if the webserver machine has login access for other users than root and the web server administrator. For a dedicated web server made just for running TWiki with limited login access the default access rights are reasonable.
4. Check the Perl installation and CPAN dependencies. Ensure that Perl 5 is installed on your system.
   • The default location of Perl is /usr/bin/perl. If it's somewhere else, change the path to Perl in the first line of each script in the twiki/bin directory.
   • Check if required modules listed in TWikiSystemRequirements are present; install modules as needed. If needed, learn how to install CPAN modules.
   • Some systems require a special extension on perl scripts (e.g. .cgi or .pl). This is normally only needed under Windows and only where perl scripts are only recognized by file extension. Linux and Unix users should normally never need to do this. If necessary, rename all files in twiki/bin (i.e. rename view to view.pl etc). If you do this, make sure you set the ScriptSuffix option in configure (Step 6).
5. Create the file LocalLib.cfg located as twiki/bin/LocalLib.cfg
   • There is a template for this file in twiki/bin/LocalLib.cfg.txt. Simply copy LocalLib.cfg.txt to LocalLib.cfg. Make sure the ownership and access rights of the copy are the same as LocalLib.cfg.txt
   • The file twiki/bin/LocalLib.cfg must contain a setting for $twikiLibPath, which must point to the absolute directory path of your twiki/lib e.g. /var/www/twiki/lib.
   • If you need to install additional CPAN modules, but can't update the main Perl installation files on the server, you can set $CPANBASE to point to your personal CPAN install. Don't forget that the webserver user has to be able to read those files as well.
6. Choose best configuration method for your webserver. There are two ways to configure Apache: config file included from httpd.conf or .htaccess files.
   • Apache config file: The recommended method is using a config file. With a config file you can put the entire TWiki configuration in ONE file (typically named twiki.conf). Performance is much better with a config file, and makes setting up a correct and safe installation easier. However using a config file requires that you can restart Apache which again means that you need root or sudo access to stop and start Apache. The TWiki apache config file is included from the main Apache config file httpd.conf. Most distributions have a directory from which any file that ends with .conf gets included when you restart Apache (Example RedHat/Fedora/Centos: /etc/httpd/conf.d). If you use a virtual host setup in Apache you should include the twiki.conf file from inside the desired virtual host config in your Apache configuration.
   • .htaccess files: This option should only be used when you cannot use a config file. Performance is slowed down because Apache has to look through all directories in search of possible .htaccess files each time someone views a page in TWiki. Normally this is the only way to control Apache in a shared host environment where you have no root or sudo privileges.
7. Configure the webserver * Make sure that Apache is configured to run CGI scripts. On Debian and Ubuntu, enter (with root privileges) a2enmod cgi. If the system may suggest cgid instead of cgi, either one is fine.
   • Unless you are an Apache expert setting up the webserver can be quite difficult. But TWiki has three resources that make setting up Apache easier.
     • The best and easiest way is to use webpage TWiki:TWiki.ApacheConfigGenerator which contains a tool that can generate a safe and working config file for TWiki on Apache.
     • In the twiki installation you find an example config file misc/twiki_httpd_conf.txt (nevertheless, it is better to use the generator).
   • In case you do not have root privileges on the server:
     • In the root of the twiki installation and in the twiki/bin directory you find example .htaccess files you can copy and modify. The files contains help text explaining how to set them up. In twiki/bin you find .htaccess.txt which can be copied to .htaccess and defined access to the CGI scripts.
     • In the TWiki misc directory you find pub-htaccess.txt which you can copy to pub/.htaccess, subdir-htaccess.txt which you can copy to all directories as .htaccess except bin and pub, and you find root-htaccess.txt which you can copy to .htaccess in the twiki root directory. But again only use .htaccess files if you do not have root privileges.
   • If you are unsure about how to do this on your system, see TWiki:TWiki.InstallingTWiki#OtherPlatforms for links to information about various server setups.
   • Note: When you use config files you need to restart Apache each time you change a setting to make the new setting active.
8. Run the configure script from your browser (enter http://yourdomain/do/configure into your browser address bar)
   • Specify and reenter a password. This is your configure password, as well as the admin user password once TWiki is running.
     • Note: In case you forgot the password, you can reset it by deleting $TWiki::cfg{Password} from LocalSite.cfg file from {TWIKI_ROOT}/lib directory.
   • When you run configure for the first time, you can only edit the General Path Settings section. Save these settings, and then return to configure to continue configuration.
   • Resolve any errors or warnings it tells you about.
   • If your webserver can be accessed by more than one domain name make sure to add the additional alternative URLs to {PermittedRedirectHostUrls}
   • When you return to configure you now need to setup Mail and Proxies. Especially the {WebMasterEmail}, and {SMTP}{MAILHOST} must be defined to enable TWiki to send administrative emails, such as for registration and notification of topic changes. Many ISPs have introduced authentication when sending emails to fight spam so you may also have to set {SMTP}{Username} and {SMTP}{Password}. If you do not want to enable mailing or want to enable it later you can uncheck {EnableEmail}.
   • If you want administrative e-mails to be signed, see S/MIME setup instructions below.

You now have a basic, unauthenticated installation running. At this point you can just point your web browser at http://yourdomain.com/do/view and start TWiki-ing away!

Important Server Security Settings

Before you continue any further there are some basic and very important security settings you have to make sure are set correctly.

1. You absolutely must turn off any kind of PHP, Perl, Python, Server Side Includes etc in the pub directory. TWiki has some built-in protection which renames files with dangerous file names by appending .txt to the file name. But this is a secondary security measure. The essential action that you must take is to turn off any possible execution of any of the attached files.
   Most Linux distributions have a default Apache installation which has PHP and server side include (SSI) enabled.
2. Don't put the whole twiki distribution into an HTML document enabled directory. Apache needs to be aware of only two directories: The bin directory should be script enabled, and the pub directory should be HTML document enabled.
   For those who do not have access to the Apache config files, a sample misc/subdir-htaccess.txt file can be copied as .htaccess to the data, lib, locale, templates, tools and working directories.
3. Attachments are not secured by default to the access control setting of the topic. In other words, anyone can read them if they know the direct URL of the attachment, which includes name of the web, topic and attachment. You can configure TWiki to secure attachments.

The TWiki:TWiki.ApacheConfigGenerator as well as the example misc/twiki_httpd_conf.txt and example misc/htaccess.txt files include the needed settings that protect against all 3 security elements.

Next Steps

Once you have TWiki installed and running, you might consider the following optional steps for setting up and customizing your TWiki site. Many of the references below refer to topics within your TWiki installation. For example, TWiki.TWikiSkins refers to the TWikiSkins topic in your TWiki web. Easy way to jump directly to view the pages is to open your own TWiki in your browser and write TWiki.TWikiSkins in the Jump test box to the right in the top bar and hit Enter. You can find these topics in the on-line reference copy at the official TWiki website: TWiki-6.1 Release.

Enable Authentication of Users

This step provides for site access control and user activity tracking on your TWiki site. This is particularly important for sites that are publicly accessible on the web. This guide describes only the most common of several possible authentication setups for TWiki and is suitable for public web sites. For information about other setups, see TWikiUserAuthentication, and TWiki:TWiki.TWikiUserAuthenticationSupplement.

These are the steps for enabling "Template Login" which asks for a username and password in a web page, and processes them using the Apache 'htpasswd' password manager. Users can log in and log out.

1. Under the Security Settings pane of configure :
   1. Select TWiki::LoginManager::TemplateLogin for {LoginManager}.
   2. Select TWiki::Users::HtPasswdUser for {PasswordManager}.
   3. Save your configure settings.
   4. Register yourself using the TWikiRegistration topic.
      Check that the password manager recognizes the new user. Check that a new line with the username and encrypted password is added to the data/.htpasswd file. If not, you probably got a path wrong, or the permissions may not allow the webserver user to write to that file.
2. Edit a topic (by clicking on the Edit link at beginning or end of topic) to check if authentication works.

You are strongly encouraged to read TWikiUserAuthentication, TWiki:TWiki.TWikiUserAuthenticationSupplement, and TWiki:TWiki.SecuringTWikiSite for further information about managing users and security of your TWiki site.

Note: The other LoginManager option TWiki::LoginManager::ApacheLogin uses a basic Apache type authentication where the browser itself prompts you for username and password. Most will find the TemplateLogin looking nicer. But ApacheLogin is required when you use Apache authentication methods like mod_ldap where all authentication is handled by an Apache module and not by the TWiki perl code. When you use ApacheLogin the apache configuration must be set up to require authentication of the some but not all the scripts in the bin directory. This section in the Apache config (or .htaccess) controls this

<FilesMatch "(attach|edit|manage|rename|save|upload|mail|logon|rest|.*auth).*">
   require valid-user
</FilesMatch>

The TWiki:TWiki.ApacheConfigGenerator includes this section when you choose ApacheLogin. In the example misc/twiki_httpd_conf.txt and bin/.htaccess.txt files this section is commented out with #. Uncomment the section when you use ApacheLogin. It is important that this section is commented out or removed when you use TemplateLogin.

Define the Administrator User(s)

Administrators have read and write access to any topic in TWiki, regardless of TWiki access controls. When you install TWiki one of the first things you will want to do is define yourself as an administrator. You become an administrator simply by adding yourself to the TWikiAdminGroup. It is the WikiName and not the login name you add to the group. Editing the TWikiAdminGroup topic requires that you are an administrator. So to add the first administrator you need to login using the internal TWiki admin user login and the password you defined in configure.

• Navigate to the TWikiAdminGroup topic
• Follow carefully the steps TWikiAdminGroup of how to become an admin
• Note that if you use ApacheLogin you have to be registered and logged in before you use the internal admin login

Set TWiki Preferences

Preferences for customizing many aspects of TWiki are set simply by editing a special topic with TWiki.

• TWikiPreferences. Read through it and identify any additional settings or changes you think you might need. You can edit the settings in TWiki.TWikiPreferences but these will be overwritten when you later upgrade to a newer TWiki version. Instead copy any settings or variables that you want to customize from TWiki.TWikiPreferences and paste them into Main.TWikiPreferences. When you later upgrade TWiki simply avoid overwriting the data/Main/TWikiPreferences.txt file and all your settings will be kept. Settings in Main.TWikiPreferences overrides settings in both TWiki.TWikiPreferences and any settings defined in plugin topics. See notes at the top of TWiki.TWikiPreferences for more information.

Enable Email Notification

Each TWiki web has an automatic email notification service that sends you an email with links to all of the topics modified since the last alert. To enable this service:

1. Confirm the Mail and Proxies settings in the Configure interface.
2. Setup a cron job (or equivalent) to call the tools/mailnotify script as described in the MailerContrib topic.

Enable Signed Email Notification

TWiki administrative e-mails are an attractive target for SPAM generators and phishing attacks. One good way to protect against this possibility to enable S/MIME signatures on all administrative e-mails. To do this, you need an an X.509 certificate and private key for the the {WebMasterEmail} email account. Obtain these as you would for any other S/MIME e-mail user.

To enable TWiki to sign administrative e-mails:

1. Enable e-mail as described above
2. If necessary, convert your certificate and key files to PEM format ( openssl has all the necessary utilities)
3. Place the certificate anyplace convenient that the webserver can read. It should be protected against write. The conventional place under linux is /etc/pki/tls/certs
4. Place the key file in a secure location that only the webserver can read. It must not be readable by anyone else, and must not be served by the webserver.
5. Using the configure script, change the following settings under Mail and Proxies:
   1. Follow the directions under {MailProgram} to enable an external mail program such as sendmail. Net::SMTP is not supported.
   2. Enter the full path to the certificate file in the {SmimeCertificateFile} configuration variable
   3. Enter the full path to the private key file in the {SmimeKeyFile} configuration variable
   4. Save the configuration
6. Re-run the configure script an resolve any errors that it identifies

All out-going administrative e-mails will now be signed.

Enable WebStatistics

You can generate a listing manually, or on an automated schedule, of visits to individual pages on a per web basis. For information on setting up this feature, see the TWikiSiteTools topic.

Automate removal of expired sessions and lease files

Per default TWiki cleans out expired session and lease files each time any topic is viewed. This however comes at a cost of lower performance. It is an advantage to define a negative value in configure for {Sessions}{ExpireAfter} (turn on expert mode to see it), and install a cronjob to run the tools/tick_twiki.pl script. Read The topic TWikiScripts for details how to do this.

Enable Localization

TWiki now supports displaying of national (non-ascii) characters and presentation of basic interface elements in different languages. To enable these features, see the Localization section of configure. For more information about these features, see TWiki:TWiki.InternationalizationSupplement.

Tailor New User Profile Topic

When a new users registers on your TWiki, a user profile topic is created for them based on the NewUserTemplate topic (and its UserForm). It contains additional resources you can use to:

• Localize the user topic.
• Add and remove fields defined in the UserForm

If you choose to tailor anything you are strongly advised to copy NewUserTemplate and UserForm to the Main web and tailor the Main web copies. TWiki will look for the NewUserTemplate in the Main web first and if it does not exist TWiki uses the default from the TWiki web. By creating a Main.NewUserTemplate and its Main.UserForm you will not loose your customization next time you upgrade TWiki.

If you added or removed fields from the user form you may also want to tailor TWikiRegistration.

Custom Start Web and Homepage

By default the TWiki home is WebHome. Users tend to create content starting from the homepage. In most cases it is better to create a new web (workspace) for default content. That way the Main web can be kept clean and used just for users and TWiki groups. For example, you could create an "Intranet" web if TWiki is primarily used as an intranet, or a "KB" web if used as a knowledge base, etc.

If you have a dedicated web as a starting point you obviously want users start at the home of that web. This can be configured in two places: 1. Redirect from site home to web home, and 2. Set the wiki logo URL.

1. Redirect from site home to web home

When a user enters the domain name of your TWiki she expects to see the homepage. You can do that either with an Apache rewrite rule or an HTML meta redirect to redirect from / to /do/view/Intranet/WebHome. Here is an example index.html containing an HTML meta redirect you can use: Customize it and put it in your HTML document root on your TWiki sever:

<html>
<head>
<meta http-equiv="refresh" content="0;/do/view/Intranet/WebHome" />
</head>
<body>
Redirecting to <a href="/do/view/Intranet/WebHome">Intranet home</a>...
</body>
</html>

2. Set the wiki logo URL

When a user clicks on the logo in the upper left or on the "Home" link in the top-bar she expects to navigate to the new homepage. You can do that by defining and customizing the following setting in TWikiPreferences as described in the Set TWiki Preferences section:

   * URL of the logo:
      * Set WIKILOGOURL = %SCRIPTURLPATH{view}%/Intranet/WebHome

Customize the Site Logo

Create a logo with a transparent background and a maximum height of 55 pixels. Attach it to TWikiPreferences, raw-edit that topic, and set the following bullet, assuming the name of the logo is my-logo-100x50.png:

   * Logo of this TWiki installation:
      * Set WIKILOGOIMG = %PUBURLPATH%/%USERSWEB%/TWikiPreferences/my-logo-100x50.png

Customize the Look of Your TWiki!

The real power of TWiki lies in its flexibility to be customized to meet your needs. You can easily change the look of the default skins (called TopMenuSkin and PatternSkin) by reading the PatternSkinCustomization.

At the official TWiki website you can find more resources. A good place to start exploring what's possible is TWiki:TWiki.TWikiAdminCookBook which offers tips and tricks for customizing your TWiki site. Many of these are appropriate to implement immediately after installing TWiki and before adding content so now's a good time to look at these.

Customize Special Pages

Some pages are meant to be customized after choice of authentication. If you do not use the internal TWiki password manager the topics that contains the features for changing and resetting passwords and changing the email address should be changed to a note describing how to perform these tasks in your organization. The topics are:

• ChangePassword
• ResetPassword
• ChangeEmailAddress

Install Plugins

TWiki:Plugins.WebHome is an extensive library of plugins for TWiki, that enhance functionality in a huge number of ways. A few plugins are pre-installed in the TWiki distribution. For more information on these, see InstalledPlugins.

You activate installed plugin in the Plugins section of configure. In this section you also find a Find More Extensions button which opens an application which can install additional plugins from the TWiki.org website. If you are behind a firewall or your server has no access to the Internet it is also possible to install plugins manually. Manual installation instructions for the plugins can be found in the plugin topics on TWiki.org. Additional documentation on TWiki plugins can be found at TWiki:TWiki.TWikiPluginsSupplement.

Some plugins require that you define their settings in configure. You fill find these under the Extensions section of configure.

WYSIWYG And Raw Edit

From TWiki release 4.2.0 on the WYSIWYG editor has been replaced by a much better and more powerful editor and it was decided that WYSIWYG would be the default edit mode. An Edit Raw link is available for those that have a need or preference for this mode.

However you may prefer to have the same user interface as in TWiki 4.1 where Edit was the raw text editor and you had a WYSIWYG button. This is possible by adding the following setting in the TWikiPreferences, WebPreferences or user hompages:

• Set EDITMETHOD = raw

Copyright, License and Classification Statements

At the bottom of each topic you will find a default copyright message saying "Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors." The WEBCOPYRIGHT setting defines this. This is often not adequate.

• If your TWiki is used in a commercial application without public access you should replace this by your normal copyright notice. You should also consider adding classifications (e.g. For Internal Use Only) so people do not have to add this manually to every new topic.
• If your TWiki is public with public access you need to decide which copyright and license the contributions should be covered by. For open source type applications licenses such as the GNU Free Documentation License, FreeBSD Documentation License, and Creative Commons license are possible licenses to consider. Remember that once people have started contributing it is difficult and not correct to change or impose licenses on existing contributions.

You change the copy right statement globally by taking these steps.

• Copy the setting WEBCOPYRIGHT from TWikiPreferences to TWikiPreferences and alter the copied text to your need.
• You can create a unique message for each web by adding the WEBCOPYRIGHT setting to WebPreferences in each web. E.g. adding a confidencial classification to a very restricted web.
• The WEBCOPYRIGHT in WebPreferences covers the documentation that comes with TWiki and is covered by the original TWiki Copyright and GPL License. You will normally leave this unchanged.

Troubleshooting

The first step is to re-run the configure script and make sure you have resolved all errors, and are satisfied that you understand any warnings.

If, by any chance, you forget the "admin" password, the same used in "configure" script, then please login to the server. Delete $TWiki::cfg{Password}= ' ...';. Set the new password using "configure" script.

Failing that, please check TWiki:TWiki.InstallingTWiki on TWiki.org, the supplemental documentation that help you install TWiki on different platforms, environments and web hosting sites. For example:

• For Unix or Linux, check TWiki:Codev.TWikiOnUnix and TWiki:Codev.TWikiOnLinux.
• For Windows, check the TWiki:Codev.WindowsInstallCookbook.
• For MacOS X, check TWiki:Codev.TWikiOnMacOSX.

It is also advisable to review TWiki:Codev/KnownIssuesOfTWiki06x01.

If you need help, ask a question in the TWiki:Support web or on TWiki:Codev/TWikiIRC (irc.freenode.net, channel #twiki)

Appendices

TWiki System Requirements

Low client and server base requirements are core features that keep TWiki widely deployable, particularly across a range of browser platforms and versions. Many Plugins and contrib modules exist which enhance and expand TWiki's capabilities; they may have additional requirements.

Server Requirements

TWiki is written in Perl 5, uses a number of shell commands, and requires RCS (Revision Control System), a GNU Free Software package. TWiki is developed in a basic Linux/Apache environment. It also works with Microsoft Windows, and should have no problem on any other platform that meets the requirements.

Resource	Required Server Environment *
Perl	5.10.1 or higher
RCS	5.7 or higher (including GNU diff) Optional, TWiki includes a pure Perl implementation of RCS that can be used instead (although it's slower)
GNU diff	GNU diff 2.7 or higher is required when not using the all-Perl RcsLite. Install on PATH if not included with RCS (check version with diff -v) Must be the version used by RCS, to avoid problems with binary attachments - RCS may have hard-coded path to diff
GNU df	Used by the site statistics to record disk usage statistics, optional. The df command is pre-installed on Linux and OS-X. On Windows install the CoreUtils for Windows.
GNU patch	For upgrades only: GNU patch is required when using the TWiki:Codev.UpgradeTWiki script
GNU fgrep, egrep	Modify command line parameters in configure if you use non-GNU grep programs
zip	Zip archive command line utility. Used by the BackupRestorePlugin to create and restore from backups.
Cron/scheduler	• Unix: cron • Windows: cron equivalents
Web server	Apache is well supported; see TWiki:TWiki.InstallingTWiki#OtherWebServers for other servers

Required CPAN Modules

Most of the CPAN libraries listesd below are part of a standard Perl installation so you most likely have them all!

See TWiki:TWiki.HowToInstallCpanModules for detailed information on how to install CPAN libraries

The following Perl CPAN modules are used by TWiki:

Optional CPAN Modules

The following Perl modules may be used by TWiki:

See TWiki:TWiki.HowToInstallCpanModules for detailed information on how to install CPAN libraries

Most of them will probably already be available in your installation. You can check version numbers with the configure script, or if you're still trying to get to that point, check from the command line like this:

perl -e 'use FileHandle; print $FileHandle::VERSION."\n"'

Client Requirements

The TWiki standard installation has relatively low browser requirements:

• HTML 3.2 compliant
• Cookies, if persistent sessions are required

CSS and Javascript are used in most skins, although there is a low-fat skin (Classic skin) available that minimizes these requirements. Some skins will require more recent releases of browsers. The default skin (Pattern) is tested on IE 6, Safari, and Mozilla 5.0 based browsers (such as Firefox).

You can easily select a balance of browser capability versus look and feel. Try the installed skins at TWikiSkinBrowser and more at TWiki:Plugins.SkinPackage.

Important note about TWiki Plugins

• Plugins can require just about anything - browser-specific functions, stylesheets (CSS), Java applets, cookies, specific Perl modules,... - check the individual Plugin specs.

Notes on Installing TWiki on Non-Root Account

The following supplemental notes to the Basic Installation instructions apply to installing TWiki on a system where you don't have Unix/Linux root (administrator) privileges, for example, on a hosted Web account or an intranet server administered by someone else.

Referring to the Basic Installation steps presented above:

• Step 2: If you cannot unpack the TWiki distribution directly in your installation directory, you can unpack the distribution on your local PC and then manually create the directory structure on your host server and upload the files as follows:
  • Using the table below, create a directory structure on your host server
  • Upload the TWiki files by FTP (transfer as text except for the image files in pub directory.)
  • Note: Don't worry if you are not able to put the twiki/lib directory at the same level as the twiki/bin directory (e.g. because CGI bin directories can't be under your home directory and you don't have root access). You can create this directory elsewhere and configure the twiki/bin/LocalLib.cfg file (done in Step 2).

    TWiki dir:	What it is:	Where to copy:	Example:
    twiki/	TWiki package	TWiki root directory, should be secure from public access	/home/smith/twiki/
    twiki/bin/	CGI bin	move to script-enabled dirctory	/home/smith/cgi/twiki/
    twiki/lib/	library files	leave in TWiki root	/home/smith/twiki/lib/
    twiki/locale/	language files	leave in TWiki root	/home/smith/twiki/locale/
    twiki/pub/	public files	move to HTML document enabled directory	/home/smith/html/twiki-pub/
    twiki/data/	topic data	leave in TWiki root	/home/smith/twiki/data/
    twiki/templates/	web templates	leave in TWiki root	/home/smith/twiki/templates/
    twiki/tools/	TWiki utlilities	leave in TWiki root	/home/smith/twiki/tools/
    twiki/working/	Temporary and internal files	leave in TWiki root	/home/smith/twiki/working/

• Step 3: Files in the pub directory must be readable as a url. This means that directory permissions should be set to 755 (or 775 ) and file permissions should be set to 644 (or 664). If you can run a chmod command, you can accomplish this in two quick steps by running these commands from the root direct:
  • chmod -R 755 pub
  • chmod 644 `find pub -type f -print`
  • In addition, you should create a .htaccess file in the pub directory, using the template included in the distribution entitled misc/pub-htaccess.txt.
  • Note: This setup does not provide for absolute security for TWiki attachments. For more information, see TWiki:Codev.SecuringYourTWiki.

• Step 6: In order to run the configure script, create a file called .htaccess in the bin directory that includes the following single line: SetHandler cgi-script . This informs the server to treat all the perl scripts in the bin directory as scripts.

For additional information about installing TWiki on a hosted accounts, see TWiki:TWiki.InstallingTWiki#WebHostingSites

Installing Manually Without Configure

It is highly recommended to use run configure from the browser when setting up TWiki. Configure does a lot of the hard work for you.

But there may be instances where you do not want to use configure or where configure simply won't run because of a missing dependency.

The manual steps you have to take are:

• Copy the file lib/TWiki.spec to lib/LocalSite.cfg
• Remove the comment # in front of $TWiki::cfg{DefaultUrlHost}, $TWiki::cfg{ScriptUrlPath}, $TWiki::cfg{PubUrlPath}, $TWiki::cfg{PubDir}, $TWiki::cfg{TemplateDir}, $TWiki::cfg{DataDir}, $TWiki::cfg{LocalesDir}, and $TWiki::cfg{OS} and make sure these settings have the correct values.
• Make sure to define at least these settings: $TWiki::cfg{LoginManager}, $TWiki::cfg{WebMasterEmail}, $TWiki::cfg{SMTP}{MAILHOST}, $TWiki::cfg{SMTP}{SENDERHOST}.

Back to top

TWiki Upgrade Guide

This guide covers upgrading from a previous version of TWiki (such as TWiki-5.1) to TWiki-6.1

Overview

TWiki-6.1.0 is a minor release that brings many usability enhancements, strengthens TWiki as an application platform, and has enhanced security. Use this guide to upgrade a previous TWiki release to TWiki-6.1. Use the TWikiInstallationGuide if you do not have data to carry forward.

Upgrade Requirements

• Please review the AdminSkillsAssumptions before you upgrade TWiki
• Review supplemental document TWiki:TWiki.TWikiUpgradeTo06x01 for latest information and experience notes.
• To upgrade from a release prior to TWiki Release 01-Sep-2004, start with TWiki:TWiki.UpgradingTWiki on TWiki.org
• To upgrade from a standard TWiki Release 01-Sep-2004 to the latest TWiki-6.1 Production Release, follow the instructions below
• Once the upgrade has been applied, an existing earlier installation will still be able to read all the topics, but should not be used to write. Make sure you take a backup!

Major Changes Compared to Earlier TWiki Releases

See TWikiReleaseNotes04x00, TWikiReleaseNotes04x01, TWikiReleaseNotes04x02, TWikiReleaseNotes04x03, TWikiReleaseNotes05x00, TWikiReleaseNotes05x01, TWikiReleaseNotes06x00, TWikiReleaseNotes06x01

New Upgrade Option with BackupRestorePlugin

TWiki now has a new solution to backup, restore and upgrade TWiki sites. It can be used via browser and on the command line. The BackupRestorePlugin is pre-installed in TWiki-5.1 and later releases; it can be installed in older TWiki releases as low as TWiki-2001-09-01 (Athens Release) to easily create a backup that can be restored on a new TWiki release. This offers an easy upgrade path for TWiki. Check TWiki:Plugins.BackupRestorePlugin for updates.

Upgrade Procedure

The following steps are a rough guide to upgrading only. It is impossible to give detailed instructions, as what you have to do may depend on whether you can configure the webserver or not, and how much you have changed distributed files in your current TWiki release.

The main steps are:

1. Install the new TWiki version, configure it, and get it to work similar to the old version
2. Install additional extensions (plugins) -- make sure to use the latest versions
3. Copy all the non-default webs from the old installation to the new
4. Copy the users from old installation to the new including all their topics from Main
5. Apply customizations to your skin (logos, menu bars etc)
6. Apply preferences from old installation
7. Switch-over

After the extensions are installed (or upgraded) in step 2, take a "golden" backup. That will come in handy for your next patch or upgrade: By checking the differences between the golden copy and your production copy, you will be able to identify all the modifications that you have applied to the core or extensions.

Installation

• Follow the installation instructions at TWiki:TWiki.TWikiInstallationGuide. Install the new release in a new directory. Do not install on top of the old release.
• Use the configure script to configure TWiki.
  • If you are upgrading from a 4.x.x release, you can carry over the configure settings from the old release.
  • You need to run configure and save the configuration once when you upgrade as this will update the altered and added settings.
  • You can also choose to start with a fresh configuration and walk through all the settings using your old twiki/lib/LocalSite.cfg as a reference. This way you will not have old obsolete settings in the new LocalSite.cfg.
  • If at any time during the installation you want to start over from fresh, delete the LocalSite.cfg file and re-run configure.
• Additional resources
  • TWiki:TWiki.InstallingTWiki#OtherPlatforms
  • TWiki:TWiki.ApacheConfigGenerator
  • TWiki:TWiki.SettingFileAccessRightsLinuxUnix
  • If you upgrade from an older TWiki your lib/TWiki.cfg from the old TWiki installation is a good resource for some of the settings you will need but you cannot reuse the old TWiki.cfg.
• Make sure you have a working basic TWiki before you continue

Install Extensions

• From TWiki-4.1.0 and on, the configure script which you ran during installation supports installation of additional plugins.
• Manual installation is possible. Follow the instruction on the plugin page at twiki.org.
• Check the plugin topics from your old TWiki installation. There may be plugin settings that you want to transfer to the new TWiki installation.
  Hint: For an easier upgrade later on, set the plugin preferences settings in the TWikiPreferences topic, not in the plugin topic. To identify the plugin, prefix the name of the setting with the capitalized name of the plugin. For example, to change the DEFAULT_TYPE setting of the CommentPlugin, create a COMMENTPLUGIN_DEFAULT_TYPE setting in Main.TWikiPreferences.
• Typical plugin settings you may have altered.
  • CommentPlugin - Set DEFAULT_TYPE
  • EditTablePlugin - Set CHANGEROWS, Set QUIETSAVE, and Set EDITBUTTON
  • InterwikiPlugin - Set RULESTOPIC
  • InterWikis - If you added your own rules you should save this topic and not overwrite it.
  • SlideShowPlugin - Make sure you did not change the embedded 'Default Slide Template' If you did you should save it. It is a bad idea to do. It is better to define your own slide show templates as separate topics that do not get overwritten when you upgrade.
  • SmiliesPlugin - Did you add your own smileys?
  • TablePlugin - Set TABLEATTRIBUTES.
• Remember that a plugin must be activated in configure.
• To avoid having to re-apply plugin settings each time you upgrade a plugin or TWiki itself, define the altered plugin settings in Main.TWikiPreferences instead.

Copy your old webs to new TWiki

• Webs come in pairs, such as twiki/data/Engineering (for page content) and twiki/pub/Engineering (for attachments).
• When upgrading from Cairo or earlier it may be necessary to unlock the rcs files in data and pub directories from the old installation using the following shell commands:
  • find data -name '*,v' -exec rcs -u -M '{}' \;
  • find pub -name '*,v' -exec rcs -u -M '{}' \;
• Copy your local webs over to the data and pub directories of the new install. Do not copy the default webs: TWiki, Main, Trash, Sandbox, _default, and _empty.
• Make sure all data and pub files and directories are owned by the webserver user.
• Note: TWiki's WebChanges topics depend on the file timestamp. If you touch the .txt files make sure to preserve the timestamp, or to change them in the sequence of old file timestamps.

Copy Users And Their Topics From Main Web

• Copy all the topics from the Main web and corresponding pub/Main directories from the old TWiki to the new TWiki but do not overwrite any of the new topics already inside the new Main directory!
• Manually merge all the users from the old Main.TWikiUsers topic to the new TWiki. If you upgrade from Cairo you can simply use the old file and add the missing new system users to the list of users. If you upgrade from TWiki-4.0.x simply use the old topic. Starting from 4.2.0 TWiki no longer ships with a Main.TWikiUsers topic. When you register the first user TWiki now checks for an existing Main.TWikiUsers and if it does not exist it gets created.
  • If you want users to be able to use a login ID other than their WikiName, such as when using LDAP or SSO authentication, set the configure setting {Register}{AllowLoginName} to 1.
• If you use data/.htpasswd for authentication copy this file from the old TWiki to the new.
  • If you upgrade from Cairo and you are using the Htpasswd login manager, then note that email addresses for users have moved out of user topics and into the password file. There is a script that performs this extra upgrade step for you - see tools/upgrade_emails.pl.
• The old Sandbox web may have a lot of useful topic and users may use it actively for drafts. Manually select the topics (remember the corresponding pub directories) from the old Sandbox web and copy them to the one of the new TWiki. Decide if you want to overwrite the sandbox homepage and left menu bar or keep the new.
• If you added or removed fields from the user topic form you may also have tailored TWiki.TWikiRegistration. Make sure you either reuse the registration topic from the old installation or apply the same field changes to the new TWiki.TWikiRegistration topic.
• Starting from 4.2.0 TWiki ships with NewUserTemplate and UserForm in the TWiki web. If you choose to tailor anything you are strongly advised to copy NewUserTemplate and UserForm to the Main web and tailor the Main web copies. TWiki will look for the NewUserTemplate in the Main web first and if it does not exist it uses the default from the TWiki web. By creating a Main.NewUserTemplate and its Main.UserForm you will not loose your tailorings next time you upgrade TWiki.
• Make sure all data and pub files and directories are owned by the webserver user.

Apply Customizations To The Skin

• Add Logos, update top bar and left bar as required.
• Apply any desired changes to style sheets and templates. The default TopMenuSkin is based on the PatternSkin.
• Additional resources:
  • TWiki:TWiki.UpgradingTWiki04x00PatchReleases
  • PatternSkinCustomization
  • PatternSkinCssCookbook

Apply Preferences From Old Installation

• Transfer any customized and local settings from TWikiPreferences to the topic pointed at by {LocalSitePreferences} (TWikiPreferences). Per default this is Main.TWikiPreferences. This avoids having to write over files in the distribution on a later upgrade.
• If you changed any of the topics in the original TWiki distribution, you will have to transfer your changes to the new install manually. There is no simple way to do this, though a suggestion is to use 'diff' to find changed files in the data/TWiki of the old and new TWiki installation, and transfer the changes into the new TWiki install. If you can run a GUI on your server, you may find that using a visual diff tool like WinMerge, meld, kdiff3, xxdiff, etc. is helpful.
• Compare the WebPreferences topics in the old TWiki Installation with the default from the new TWiki installation and add any new Preferences that may be relevant.
• Compare the WebLeftBar topics in the old TWiki Installation with the default from the new TWiki installation and add any new feature that you desire.

Switch-Over

Once you have tested the new TWiki you can switch over to the new site.

If the same domain and URL is used:

• Update the DNS settings of the TWiki domain with the IP address of the new TWiki server.
• Keep in mind that the updated DNS is not seen immediately by all users at the same time. The DNS propagation can take several hours and depends on the time to live (TTL) setting. Because of this it is recommended to disable content update on the old server. You could simply rename or move all scripts in twiki/bin that allow content update, such as attach, edit, manage, rename, save, upload, rest. Alternatively, if you have a recent TWiki version on the old server you can set a READONLYSKINMODE = 1 setting in Main.TWikiPreferences to turn the skin into read-only mode.

If the domain or URL changes:

• Add a DNS setting for the new TWiki domain if needed.
• Redirect users visiting the old TWiki to the new TWiki. The TWiki:Plugins.MovedSkin has been designed for that task. Install it on your old TWiki, and configure it with the proper URL of the new TWiki. After that, users on the old TWiki will see a yellow box informing them of the move, with a link to the new URL of the page visited.

Customization of Special Pages

Some pages in the TWiki web are meant to be customized after choice of authentication. If you do not use the internal TWiki password manager the topics that contains the features for changing and resetting passwords and changing the email address should be changed to a note describing how to perform these tasks in your organization. If you have made such customizations remember to replace these topics in the TWiki web with the tailored versions from your old installation. The topics are:

• TWiki.ChangePassword
• TWiki.ResetPassword
• TWiki.ChangeEmailAddress

Upgrading from Cairo to TWiki-4 (additional advice)

Favicon

TWiki-4's PatternSkin introduces the use of the favicon feature which most browsers use to show a small icon in front of the URL and for bookmarks.

In TWiki-4 it is assumed that each web has a favicon.ico file attached to the WebPreferences topic. When you upgrade from Cairo to TWiki-4 you do not have this file and you will get flooded with errors the error log of your web server. There are two solutions to this.

• Attach a favicon.ico file to WebPreferences in each web.
• Preferred: Change the setting of the location of favicon.ico in TWikiPreferences so all webs use the favicon.ico from the TWiki web. This is the fastest and easiest solution.

To change the location of favicon.ico in TWikiPreferences to the TWiki web add the following setting to TWikiPreferences:

   * Set FAVICON = %PUBURLPATH%/%SYSTEMWEB%/%WEBPREFSTOPIC%/favicon.ico

TWikiUsers topic in Main web

Your old Main.TWikiUsers topic will work in the new TWiki but you will need to ensure that the following four users from the TWikiUsersTemplate topic are copied to the existing TWikiUsers topic in proper alphabetical order:

   * TWikiContributor - 2005-01-01
   * TWikiGuest - guest - 1999-02-10
   * TWikiRegistrationAgent - 2005-01-01
   * UnknownUser - 2005-01-01

What these users are:

• TWikiContributor - placeholder for a TWiki developer, and is used in TWiki documentation
• TWikiGuest - guest user, used as a fallback if the user can't be identified
• TWikiRegistrationAgent - special user used during the new user registration process
• UnknownUser - used where the author of a previously stored piece of data can't be determined

You additionally need to ensure that TWikiUsers has the Set ALLOWTOPICCHANGE = TWikiAdminGroup, TWikiRegistrationAgent access control setting. Otherwise people will not be able to register.

Important Changes since TWiki-4.0.5

Supported Perl version

TWiki 4.0.5 worked on Perl version 5.6.X. Reports from users has shown that unfortunately TWiki 4.1.0 does not support Perl versions older then 5.8.0. It is the goal that TWiki should work on at least Perl version 5.6.X but none of the developers have had access to Perl installations older than 5.8.0.

Since TWiki 4.1.0 has some urgent bugs the development team decided to release TWiki 4.1.1 without resolving the issue with Perl 5.6.X. We will however address this and try and resolve it for a planned 4.1.2 release. The TWiki community is very interested in contributions from users that have fixes for the code which will enable TWiki to run on older versions of Perl.

See the WhatVersionsOfPerlAreSupported topic to keep up to date with the discussion how to get back support for earlier Perl versions.

Template spec changed

Until TWiki 4.0.5 TWikiTemplates the text inside template definition blocks (anything between %TMPL:DEF{"block"}% and %TMPL:END% was stripped of leading and trailing white space incl new lines.

This caused a lot of problems for skin developers when you wanted a newline before or after the block text.

From TWiki 4.1.0 this has changed so that white space is no longer stripped. Skins like PatternSkin and NatSkin have been updated so that they work with the new behavior. But if you use an older skin or have written your own you will most likely need to make some adjustments.

It is not difficult. The general rule is - if you get mysterious blank lines in your skin, the newline after the %TMPL:DEF{"block"}% needs to be removed. Ie. the content of the block must follow on the same line as the TMPL:DEF.

The spec change have the same impact on CommentPlugin templates where you may have to remove the first line break after the TMPL:DEF. See the CommentPluginTemplate for examples of how comment template definitions should look like in TWiki-4.1.X

An example: A CommentPlugin template that adds a comment as appending a row to a table. Before the spec change this would work.

<verbatim>
%TMPL:DEF{OUTPUT:tabletest}%%POS:BEFORE%
|%URLPARAM{"comment"}%| -- %WIKIUSERNAME% - %DATE% |
%TMPL:END%
</verbatim>

From Twiki 4.1.0 the old template definition will add an empty line before the new table row. To fix it simply remove the new line before the table.

<verbatim>
%TMPL:DEF{OUTPUT:tabletest}%%POS:BEFORE%|%URLPARAM{"comment"}%| -- %WIKIUSERNAME% - %DATE% |
%TMPL:END%
</verbatim>

The advantage of the spec change is that now you can add leading and trailing white space including new lines. This was not possible before.

Important Changes since TWiki-4.1.0

New location for session and other temporary files

An upgrader upgrading to 4.1.1 should note the following important change

The directory for passthrough files and session files have been replaced by a common directory for temporary files used by TWiki. Previously the two configure settings {PassthroughDir} and {Sessions}{Dir} were by default set to /tmp. These config settings have been replaced by {TempfileDir} with the default setting value /tmp/twiki. If the twiki directory does not exist twiki will create it first time it needs it.

It is highly recommended no longer to use the tmp directory common to other web applications and the new default will work fine for most. You may want to delete all the old session files in /tmp after the upgrade to 4.1.1. They all start with cgisess_. It is additionally highly recommended to limit write access to the {TempfileDir} for security reasons if you have non-admin users with login access to the webserver just like you would do with the other webserver directories.

Important Changes since TWiki-4.1.2

New WYSIWYG Editor

TWiki now ships with a new WYSIWYG editor based on TinyMCE which replaces the Kupu based editor. TinyMCE is not a perfect Wysiwyg editor but it is magnitudes better than the previously used Kupu editor.

The WysiwygPlugin that drives the engine behind both TinyMCE has additionally been heavily improved so that fewer TWiki Applications are negatively affected by editing in WYSIWYG mode.

When TinyMCEPlugin is enabled, the Edit button by default becomes WYSIWYG editing mode. A new Raw Edit link has been added to enable application developers to edit the good old way.

The WYSIWYG button has been removed.

NEWTOPICLINKSYMBOL removed

The NEWTOPICLINKSYMBOL preference which was deprecated in 4.1 has now been removed from the code. If you want to control the appearance of new links, you can use NEWLINKFORMAT.

UserForm and NewUserTemplate Customization

When a new user registers on TWiki his user topic is created based on the NewUserTemplate and UserForm.

The NewUserTemplate was located in the TWiki web and the UserForm in the Main web. When upgrading TWiki these were some of the topics you had to take care not to overwrite.

From 4.2.0 the UserForm and NewUserTemplate are distributed in the TWiki web. If you create the two in the Main web the Main web version will be used instead. So if you tailor the user topic format or the form then you should always copy the two files to the Main web and modify the ones in the Main web. When you later upgrade TWiki your tailored template and form will not be overwritten.

TWikiUsers no longer distributed

The Main.TWikiUsers topic contains all the registered users. It is a topic you do not want to overwrite when you upgrade TWiki.

From 4.2.0 this file is no longer included in the TWiki distribution. When you register the first time TWiki creates the Main.TWikiUsers topic in the Main web if it does not exist already. This means that you can now upgrade TWiki without risk of overwriting the important TWikiUsers topic.

• For new installers this makes no difference at all
• For upgraders this is one less problem to worry about as your important Main.TWikiUsers topic now no longer gets overwritten when upgrading.

New working directory

A new working directory which by default is located in the twiki root, has been introduced which contains:

• registration_approvals - with 4.2.0 it is moved to here from the data directory.
• tmp - so we now avoid having to fight with special access rights and /tmp directory that gets cleaned out when booting.
• work_areas - with 4.2.0 it is moved to here from the pub directory. Configure automatically moved the directory when you upgrade.

Note: Remember to restrict access to this new directory when you upgrade.

The configure setting {WorkingDir} defines the container directory for temporary files, extensions' work areas, and intermediate registration data. The default is working under your installation root.

Take care for that change if you run your own routine to delete obsolete session files, which will now be found under working/tmp/cgisess*.

New Internal Admin Login

TWiki 4.2 introduces a new Internal Admin Login feature which uses "admin" (configurable) as username and the password used for configure to become temporary administrator. When you do a new installation you need to use this feature as Main.TWikiAdminGroup is now access restricted by default to avoid security attacks during the hours an installation may take. From configure there is a link to the TWikiAdminGroup topic and on TWikiAdminGroup the step by step instructions are written in a yellow box. Our advice is not to remove this help text in case you need it later.

Important Changes since TWiki-5.0.0

New TopMenuSkin

The TopMenuSkin adds pulldown menus for better usability and corporate/modern look&feel. This skin is based on the PatternSkin, which used the WebLeftBar in each web for navigation. The TopMenuSkin has a new WebTopBar that defines the menu structure in each web. A default menu is shown in case WebTopBar is missing in a web, so you do not need to add a WebTopBar topic to all your existing webs. See TopMenuSkin instructions in case you need a customized menu structure in a specific web.

Important Changes since TWiki-5.1.0

New Page Bookmarks Feature

A new bookmark feature has been introduced that replaces the personal left-bar links. Bookmarking a page is now a simple point and click operation: In the Account pulldown menu, select "Bookmark this page...". Existing bookmarks can be managed with an edit table in Main.<wikiname>Bookmarks topic, accessible via the "----- Bookmarks -----" pulldown menu of the Account pulldown.

The personal left-bar topics such as JohnSmithLeftBar are no longer used. Ask users to select the "----- Bookmarks -----" pulldown menu of the Account pulldown to initially create the bookmarks topic, then to either bookmark pages, or to manually copy & paste old left-bar links to the bookmarks topic.

User Profile Pages Tailored for Workplace

Previous user profile pages had a bare bones look and the form fields were more tailored for public TWiki sites. TWiki-5.1 brings a more visual/modern page layout with profile picture selector, as well as default form fields tailored for the workplace.

Changes to the UserForm:

Renamed:

• FirstName to First Name (no change in %META:FIELD name)
• LastName to Last Name (no change in %META:FIELD name)
• OrganisationName to Organization
• OrganisationURL to URL
• Profession to Titles
• VoIP to Skype ID
• State to Region

• Address
• InstantMessaging (IM)
• HomePage
• Comment

• Department
• Status Update

When upgrading user profile pages pay attention to the renamed and removed fields.

Important Changes since TWiki-6.0.0

Spec Change for Empty DENYTOPICVIEW

From TWiki 4.0 and prior to 6.0, the syntax * Set DENYTOPICVIEW = (nothing) in a topic means deny nobody the topic view. The reason for this behavior is that it allows public access to a topic in a restricted web, e.g. having * Set ALLOWWEBVIEW = Main.VipGroup in WebPreferences. This is not symmetric with the fact that an empty DENYWEBVIEW is the same as an undefined DENYWEBVIEW, hence confusing.

From TWiki 6.0 on, an empty DENYTOPICVIEW means the same as not defined. To open up a topic in a restricted web, you need to use * Set ALLOWTOPICVIEW = Main.AllUsersGroup. The AllUsersGroup is new. It is a pseudo group containing all authenticated and unauthenticated users. You can use AllAuthUsersGroup if you want to specify all authenticated users.

To keep publicly accessible topics in restricted webs publicly accessible, the tools/eliminate_emptydenytopic script is provided, which replaces * Set DENYTOPIC<action> = with * Set ALLOWTOPIC<action> = Main.AllUsersGroup in all topics in all webs.

Note: See more changes since TWiki-6.0.0 in TWikiReleaseNotes06x00.

Important Changes since TWiki-6.1.0

There are no significant changes affecting an upgrade from TWiki-6.0.x to TWiki-6.1.0.

Note: See changes since TWiki-6.1.0 in TWikiReleaseNotes06x01.

Back to top

TWiki User Authentication

TWiki site access control and user activity tracking options

Overview

Authentication, or "logging in", is the process by which a user lets TWiki know who they are.

Authentication isn't just about access control. TWiki uses authentication to identify users so it can keep track of who made changes, and manage a wide range of personal settings. With authentication enabled, users can personalise TWiki and contribute as recognised individuals, instead of ghosts.

TWiki authentication is very flexible, and can either stand alone or integrate with existing authentication schemes. You can set up TWiki to require authentication for every access or only for changes. Authentication is also essential for access control.

Quick Authentication Test - Use the %USERINFO% variable to return your current identity:

• You are guest, TWikiGuest,

TWiki user authentication is split into four categories: Password management, user mapping, user registration, and login management. Password management deals with how users' personal data is stored. Registration deals with how new users are added to the wiki. Login management deals with how users log in.

Once a user is logged in, they can be remembered using a Client Session stored in a cookie in the browser (or by other less elegant means if the user has cookies disabled). This avoids the need of having to log in again and again.

TWiki user authentication is configured through the Security Settings pane in the configure interface.

Please note that FileAttachments are not protected by TWiki user authentication by default. The TWiki:TWiki.ApacheConfigGenerator has an option to protect file attachments.

Tip: TWiki:TWiki.TWikiUserAuthenticationSupplement on TWiki.org has supplemental documentation on user authentication.

Password Management

As shipped, TWiki supports the Apache 'htpasswd' password manager. This manager supports the use of .htpasswd files on the server. These files can be unique to TWiki, or can be shared with other applications (such as an Apache webserver). A variety of password encodings are supported for flexibility when re-using existing files. See the descriptive comments in the Security Settings section of the configure interface for more details.

You can easily plug in alternate password management modules to support interfaces to other third-party authentication databases.

User Mapping

Often, when you are using an external authentication method, you want to map from an unfriendly "login name" to a more friendly WikiName. Also, an external authentication database may well have user information you want to import into TWiki, such as user groups.

By default, TWiki supports mapping of usernames to wikinames, and supports TWiki groups internal to TWiki. If you want, you can plug in an alternate user mapping module to support importing groups and other entities.

User Registration

New user registration uses the password manager to set and change passwords, and to store email addresses. It is also responsible for the new user verification process. The registration process supports single user registration via the TWikiRegistration page, and bulk user registration via the BulkRegistration page (for admins only).

The registration process is also responsible for creating user topics and setting up the mapping information used by the User Mapping support.

Note: If you are restricting the entire Main web to TWikiGuest, you are required to add TWikiRegistrationAgent to ALLOWWEBCHANGE in your Main/WebPreferences. By doing so, new users are able to register without any errors.

Login Management

Login management controls how users log in. There are three basic options: No login, login via a TWiki login page, and login using webserver authentication support.

No Login (select none in configure)

No Login does exactly what it says. Forget about authentication to make your site completely public - anyone can browse and edit freely, in classic Wiki style. All visitors are given the TWikiGuest default identity so you can't track individual user activity.

Note: This setup is not recommended on public websites for security reasons; anyone would be able to change system settings and perform tasks usually restricted to administrators.

Template Login (select TWiki::LoginManager::TemplateLogin in configure)

Template Login asks for a username and password in a web page, and processes them using whatever Password Manager you choose. Users can log in and log out. Client Sessions are used to remember users. Users can choose to have their session remembered so they will automatically be logged in the next time they start their browser.

Enabling Template Login

1. Use the configure interface to
   1. select the TWiki::LoginManager::TemplateLogin login manager (on the Security Settings pane).
   2. select the appropriate password manager for your system, or provide your own.
   3. there is also an EXPERT configure setting {TemplateLogin}{PreventBrowserRememberingPassword} that you can set to prevent browsers from remembering usernames and passwords if you are concerned about public terminal usage.
2. Register yourself in the TWikiRegistration topic.
   Check that the password manager recognises the new user. If you are using .htpasswd files, check that a new line with the username and encrypted password is added to the .htpasswd file. If not, you probably got a path wrong, or the permissions may not allow the webserver user to write to that file.
3. Create a new topic to check if authentication works.
4. Edit the TWikiAdminGroup topic in the Main web to include users with system administrator status.
   This is a very important step, as users in this group can access all topics, independent of TWiki access controls.

TWikiAccessControl has more information on setting up access controls.

At this time TWikiAccessControls cannot control access to files in the pub area, unless they are only accessed through the viewfile script. If your pub directory is set up in the webserver to allow open access you may want to add .htaccess files in there to restrict access.

You can create a custom version of the TWikiRegistration form by copying the topic, and then deleting or adding input tags in your copy. The name="" parameter of the input tags must start with: "Twk0..." (if this is an optional entry), or "Twk1..." (if this is a required entry). This ensures that the fields are carried over into the user profile page correctly. Do not modify the version of TWikiRegistration shipped with TWiki, as your changes will be overwritten next time you upgrade.

The default new user template page is in TWiki.NewUserTemplate. The same variables get expanded as in the template topics. You can create a custom new user profile page by creating the Main.NewUserTemplate topic, which will then override the default.

Apache Login (select TWiki::LoginManager::ApacheLogin in configure)

Using this method TWiki does not authenticate users internally. Instead it depends on the REMOTE_USER environment variable, which the webserver passes to TWiki when you enable authentication in the webserver (as described in RFC 3875 - "The Common Gateway Interface v1.1").

The advantage of this scheme is that if you have an existing website authentication scheme using Apache modules, such as mod_authnz_ldap or mod_authn_dbd, you can just plug in directly to them.

The disadvantage is that because the user identity is cached in the browser, you can log in, but you can't log out again unless you restart the browser.

TWiki maps the REMOTE_USER that was used to log in to the webserver to a WikiName using the table in TWikiUsers. This table is updated whenever a user registers, so users can choose not to register (in which case their webserver login name is used for their signature) or register (in which case that login name is mapped to their WikiName).

The same private .htpasswd file used in TWiki Template Login can be used to authenticate Apache users, using the Apache Basic Authentication support.

Warning: Do not use the Apache htpasswd program with .htpasswd files generated by TWiki! htpasswd wipes out email addresses that TWiki plants in the info fields of this file.

Enabling Apache Login using mod_auth

1. Use configure to select the TWiki::LoginManager::ApacheLogin login manager.
2. Use configure to set up TWiki to create the right kind of .htpasswd entries.
3. Create a .htaccess file in the twiki/bin directory.
   There is an template for this file in twiki/bin/.htaccess.txt that you can copy and change. The comments in the file explain what needs to be done.
   If you got it right, the browser should now ask for a login name and password when you click on Edit. If .htaccess does not have the desired effect, you may need to "AllowOverride All" for the directory in httpd.conf (if you have root access; otherwise, e-mail web server support)
   At this time TWikiAccessControls do not control access to files in the pub area, unless they are only accessed through the viewfile script. If your pub directory is set up to allow open access you may want to add .htaccess files in there as well to restrict access
4. You can create a custom version of the TWikiRegistration form by copying the default topic, and then deleting or adding input tags in your copy. The name="" parameter of the input tags must start with: "Twk0..." (if this is an optional entry), or "Twk1..." (if this is a required entry). This ensures that the fields are carried over into the user profile page correctly. Do not modify the version of TWikiRegistration shipped with TWiki, as your changes will be overwritten next time you upgrade.
   The default new user template page is in TWiki.NewUserTemplate. The same variables get expanded as in the template topics. You can create a custom new user profile page by creating the Main.NewUserTemplate topic, which will then override the default.
5. Register yourself in the TWikiRegistration topic.
   Check that a new line with the username and encrypted password is added to the .htpasswd file. If not, you may have got a path wrong, or the permissions may not allow the webserver user to write to that file.
6. Create a new topic to check if authentication works.
7. Edit the TWikiAdminGroup topic in the Main web to include users with system administrator status.
   This is a very important step, as users in this group can access all topics, independent of TWiki access controls.

Logons via bin/logon

Any time a user requests a page that needs authentication, they will be forced to log on. It may be convenient to have a "login" link as well, to give the system a chance to identify the user and retrieve their personal settings. It may be convenient to force them to log in.

The bin/logon script enables this. If you are using Apache Login, the bin/logon script must be setup in the bin/.htaccess file to be a script which requires a valid user. Once authenticated, it will redirect the user to the view URL for the page from which the logon script was linked.

Sessions

TWiki uses the CPAN:CGI::Session and CPAN:CGI::Cookie modules to track sessions. These modules are de facto standards for session management among Perl programmers. If you can't use Cookies for any reason, CPAN:CGI::Session also supports session tracking using the client IP address.

You don't have to enable sessions to support logins in TWiki. However it is strongly recommended. TWiki needs some way to remember the fact that you logged in from a particular browser, and it uses sessions to do this. If you don't enable sessions, TWiki will try hard to remember you, but due to limitations in the browsers, it may also forget you (and then suddenly remember you again later!). So for the best user experience, you should enable sessions.

There are a number of TWikiVariables available that you can use to interrogate your current session. You can even add your own session variables to the TWiki cookie. Session variables are referred to as "sticky" variables.

Getting, Setting, and Clearing Session Variables

You can get, set, and clear session variables from within TWiki web pages or by using script parameters. This allows you to use the session as a personal "persistent memory space" that is not lost until the web browser is closed. Also note that if a session variable has the same name as a TWiki preference, the session variables value takes precedence over the TWiki preference. This allows for per-session preferences.

To make use of these features, use the variables:

Special read-only session variables:

• %SESSION_VARIABLE{"AUTHUSER"}% - user ID, current value:
• %SESSION_VARIABLE{"SESSION_REQUEST_NUMBER"}% - number of pages accessed by current user since login, current value:

Notes:

• You cannot override access controls preferences this way.
• You can use the SetGetPlugin to set and get variables that are not user specific. This plugin can store variables persistently if needed.

Cookies and Transparent Session IDs

TWiki normally uses cookies to store session information on a client computer. Cookies are a common way to pass session information from client to server. TWiki cookies simply hold a unique session identifier that is used to look up a database of session information on the TWiki server.

For a number of reasons, it may not be possible to use cookies. In this case, TWiki has a fallback mechanism; it will automatically rewrite every internal URL it sees on pages being generated to one that also passes session information.

TWiki Username vs. Login Username

This section applies only if you are using authentication with existing login names (i.e. mapping from login names to WikiNames).

TWiki internally manages two usernames: Login Username and TWiki Username.

• Login Username: When you login to the intranet, you use your existing login username, ex: pthoeny. This name is normally passed to TWiki by the REMOTE_USER environment variable, and used internally. Login Usernames are maintained by your system administrator.

• TWiki Username: Your name in WikiNotation, ex: PeterThoeny, is recorded when you register using TWikiRegistration; doing so also generates a user profile page in the Main web.

TWiki can automatically map an Intranet (Login) Username to a TWiki Username if the {AllowLoginName} is enabled in configure. The default is to use your WikiName as a login name.

NOTE: To correctly enter a WikiName - your own or someone else's - be sure to include the Main web name in front of the Wiki username, followed by a period, and no spaces, for example Main.WikiUsername or %USERSWEB%.WikiUsername. This points WikiUsername to the Main web, where user profile pages are located, no matter which web it's entered in. Without the web prefix, the name appears as a NewTopic everywhere but in the Main web.

Changing Passwords

If your {PasswordManager} supports password changing, you can change and reset passwords using forms on regular pages.

• The ChangePassword form ( TWiki/ChangePassword )
• The ResetPassword form ( TWiki/ResetPassword )

Changing E-mail Addresses

If the active {PasswordManager} supports storage and retrieval of user e-mail addresses, you can change your e-mail using a regular page. As shipped, this is true only for the Apache 'htpasswd' password manager.

• The ChangeEmailAddress form ( TWiki/ChangeEmailAddress )

Controlling access to individual scripts

• For Template Login, update the {AuthScripts} list using configure
• For Apache Login, add/remove the script from .htaccess

How to choose an authentication method

One of the key features of TWiki is that it is possible to add HTML to topics. No authentication method is 100% secure on a website where end users can add HTML, as there is always a risk that a malicious user can add code to a topic that gathers user information, such as session IDs. TWiki developers have been forced to make certain tradeoffs, in the pursuit of efficiency, that may be exploited by a hacker.

This section discusses some of the known risks. You can be sure that any potential hackers have read this section as well!

At one extreme, the most secure method is to use TWiki via SSL (Secure Sockets Layer), with a login manager installed and Client Sessions turned off.

Using TWiki with sessions turned off is a pain, though, as with all the login managers there are occasions where TWiki will forget who you are. The best user experience is achieved with sessions turned on.

As soon as you allow the server to maintain information about a logged-in user, you open a door to potential attacks. There are a variety of ways a malicious user can pervert TWiki to obtain another users session ID, the most common of which is known as a cross-site scripting attack. Once a hacker has an SID they can pretend to be that user.

To help prevent these sorts of attacks, TWiki supports IP matching, which ensures that the IP address of the user requesting a specific session is the same as the IP address of the user who created the session. This works well as long as IP addresses are unique to each client, and as long as the IP address of the client can't be faked.

Session IDs are usually stored by TWiki in cookies, which are stored in the client browser. Cookies work well, but not all environments or users permit cookies to be stored in browsers. So TWiki also supports two other methods of determining the session ID. The first method uses the client IP address to determine the session ID. The second uses a rewriting method that rewrites local URLs in TWiki pages to include the session ID in the URL.

The first method works well as long as IP addresses are unique to each individual client, and client IP addresses can't be faked by a hacker. If IP addresses are unique and can't be faked, it is almost as secure as cookies + IP matching, so it ranks as the fourth most secure method.

If you have to turn IP matching off, and cookies can't be relied on, then you may have to rely on the second method, URL rewriting. This method exposes the session IDs very publicly, so should be regarded as "rather dodgy".

Most TWiki sites don't use SSL, so, as is the case with most sites that don't use SSL, there is always a possibility that a password could be picked out of the ether. Browsers do not encrypt passwords sent over non-SSL links, so using Apache Login is no more secure than Template Login.

Of the two shipped login managers, Apache Login is probably the most useful. It lets you do this sort of thing: wget --http-user=RogerRabbit --http-password=i'mnottelling http://www.example.com/bin/save/Sandbox/StuffAUTOINC0?text=hohoho,%20this%20is%20interesting i.e. pass in a user and password to a request from the command-line. However it doesn't let you log out.

Template Login degrades to url re-writing when you use a client like dillo that does not support cookies. However, you can log out and back in as a different user.

Finally, it would be really neat if someone was to work out how to use certificates to identify users.....

See TWiki:TWiki.SecuringTWikiSite for more information.

Back to top

TWiki Access Control

Restricting read and write access to topics and webs, by Users and groups

TWiki Access Control allows you restrict access to single topics and entire webs, by individual user and by user Groups. Access control, combined with TWikiUserAuthentication, lets you easily create and manage an extremely flexible, fine-grained privilege system.

Tip: TWiki:TWiki.TWikiAccessControlSupplement on TWiki.org has additional documentation on access control.

An Important Control Consideration

Your organization will learn that, while fostering an open collaborative environment, soft security (peer review), together with version control (complete audit trail) will take care of any security concern you might have.

Open, free-form editing is the essence of WikiCulture - what makes TWiki different and often more effective than other collaborative environments. For that reason, it is strongly recommended that decisions to restrict read or write access to a web or a topic are made with great care - the more restrictions, the less wiki in the mix. Experience shows that unrestricted write access works very well because:

• Peer influence is enough to ensure that only relevant content is posted.
• Peer editing - the ability for anyone to rearrange all content on a page - keeps topics focused.
• In TWiki, content is transparently preserved under revision control:
  • Edits can easily be rolled back to a previous revision if needed.
  • Users are encouraged to edit and refactor (condense a long topic), since there's a safety net.

As a collaboration guideline:

• Create broad-based Groups (for more and varied input), and...
• Avoid creating view-only topics (if you can read it, you should be able to contribute to it).

Permissions settings of the webs on this TWiki site

Web	Sitemap	VIEW		CHANGE		RENAME
	Listed	DENY	ALLOW	DENY	ALLOW	DENY	ALLOW
TWiki	on				TWikiAdminGroup		TWikiAdminGroup
JUNOProjectTemplateWeb	on

Please Note:

• A blank in the the above table may mean either the corresponding control is absent or commented out or that it has been set to a null value. The two conditions have dramatically different and possibly opposed semantics.
• TWikiGuest is the guest account - used by unauthenticated users.
• The TWiki web must not deny view to TWikiGuest; otherwise, people will not be able to register.

Note: Above table comes from SitePermissions

Authentication vs. Access Control

Authentication: Identifies who a user is based on a login procedure. See TWikiUserAuthentication.

Access control: Restrict access to content based on users and groups once a user is identified.

Users and Groups

Access control is based on the familiar concept of Users and Groups. Users are defined by their WikiNames. They can then be organized in unlimited combinations by inclusion in one or more user Groups. For convenience, Groups can also be included in other Groups.

Managing Users

A user can create an account in TWikiRegistration. The following actions are performed:

• WikiName and encrypted password are recorded using the password manager if authentication is enabled.
• A confirmation e-mail is sent to the user.
• A user profile page with the WikiName of the user is created in the Main web.
• The user is added to the TWikiUsers topic.

The default visitor name is TWikiGuest. This is the non-authenticated user.

Managing Groups

The following describes the standard TWiki support for groups. Your local TWiki may have an alternate group mapping manager installed. Check with your TWiki administrator if you are in doubt.

Groups are defined by group topics located in the Main web. To create a new group, visit TWikiGroups and enter the name of the new group ending in Group into the "new group" form field. This will create a new group topic with two important settings:

• Set GROUP = < list of Users and/or Groups >
• Set ALLOWTOPICCHANGE = < list of Users and/or Groups >

The GROUP setting is a comma-separated list of users and/or other groups. Example:

• Set GROUP = SomeUser, OtherUser, SomeGroup

The ALLOWTOPICCHANGE setting defines who is allowed to change the group topic; it is a comma delimited list of users and groups. You typically want to restrict that to the members of the group itself, so it should contain the name of the topic. This prevents users not in the group from editing the topic to give themselves or others access. For example, for the MarketingGroup topic write:

• Set ALLOWTOPICCHANGE = MarketingGroup

Note: TWiki has strict formatting rules. Make sure you have a real bullet. (In raw edit it is three or six spaces, an asterisk, and an extra space in front of any access control rule.)

The Super Admin Group

A number of TWiki functions (for example, renaming webs) are only available to administrators. Administrators are simply users who belong to the SuperAdminGroup. This is a standard user group, the name of which is defined by {SuperAdminGroup} setting in configure. The default name of this group is the TWikiAdminGroup. The system administrator may have chosen a different name for this group if your local TWiki uses an alternate group mapping manager but for simplicity we will use the default name TWikiAdminGroup in the rest of this topic.

You can create new administrators simply by adding them to the TWikiAdminGroup topic. For example,

• Set GROUP = RobertCailliau, TimBernersLee

On a large TWiki installation having hundreds or thousands of webs, a single super admin group may not be able to take care of all of those webs. One way to deal with that is to have a super admin group for each web. AutonomousWebs shows how to.

Restricting Access

You can define who is allowed to read or write to a web or a topic. Note that some plugins may not respect access permissions.

• Restricting VIEW blocks viewing and searching of content. When you restric VIEW to a topic or web, this also restricts INCLUDE and Formatted SEARCH from showing the content of the topics.
• Restricting CHANGE blocks creating new topics, changing topics or attaching files.
• Restricting RENAME prevents renaming of topics within a web.

Note that there is an important distinction between CHANGE access and RENAME access. A user can CHANGE a topic, but thanks to version control their changes cannot be lost (the history of the topic before the change is recorded). However if a topic or web is renamed, that history may be lost. Typically a site will only give RENAME access to administrators and content owners.

Controlling access to a Web

You can define restrictions on who is allowed to view a TWiki web. You can restrict access to certain webs to selected Users and Groups, by:

• authenticating all webs and restricting selected webs: Topic access in all webs is authenticated, and selected webs have restricted access.
• authenticating and restricting selected webs only: Provide unrestricted viewing access to open webs, with authentication and restriction only on selected webs.

• You can define these settings in the WebPreferences topic, preferable towards the end of the topic:
  • Set DENYWEBVIEW = < comma-delimited list of Users and Groups >
  • Set ALLOWWEBVIEW = < comma-delimited list of Users and Groups >
  • Set DENYWEBCHANGE = < comma-delimited list of Users and Groups >
  • Set ALLOWWEBCHANGE = < comma-delimited list of Users and Groups >
  • Set DENYWEBRENAME = < comma-delimited list of Users and Groups >
  • Set ALLOWWEBRENAME = < comma-delimited list of Users and Groups >

For example, set this to restrict a web to be viewable only by the MarketingGroup:

• Set ALLOWWEBVIEW = Main.MarketingGroup

If your site allows hierarchical webs, then access to sub-webs is determined from the access controls of the parent web, plus the access controls in the sub-web. So, if the parent web has ALLOWWEBVIEW set, this will also apply to the subweb. Also note that you will need to ensure that the parent web's FINALPREFERENCES does not include the access control settings listed above. Otherwise you will not be able override the parent web's access control settings in sub-webs.

Creation and renaming of sub-webs is controlled by the WEBCHANGE setting on the parent web (or ROOTCHANGE for root webs). Renaming is additionally restricted by the setting of WEBRENAME in the web itself.

Note: If you restrict access to the Main, make sure to add the TWikiRegistrationAgent so that users can register. Example:

• Set ALLOWWEBCHANGE = TWikiAdminGroup, TWikiRegistrationAgent

Note: For Web level access rights Setting any of these settings to an empty value has the same effect as not setting them at all. Please note that the documentation of TWiki 4.0 and earlier versions of TWiki 4.1 did not reflect the actual implementation, e.g. an empty ALLOWWEBVIEW does not prevent anyone from viewing the web, and an an empty DENYWEBVIEW does not allow all to view the web.

Controlling access to a Topic

• You can define these settings in any topic, preferable towards the end of the topic:
  • Set DENYTOPICVIEW = < comma-delimited list of Users and Groups >
  • Set ALLOWTOPICVIEW = < comma-delimited list of Users and Groups >
  • Set DENYTOPICCHANGE = < comma-delimited list of Users and Groups >
  • Set ALLOWTOPICCHANGE = < comma-delimited list of Users and Groups >
  • Set DENYTOPICRENAME = < comma-delimited list of Users and Groups >
  • Set ALLOWTOPICRENAME = < comma-delimited list of Users and Groups >

For example, set this to restrict a topic to be viewable only by the MarketingExecGroup:

• Set ALLOWTOPICVIEW = Main.MarketingExecGroup

You may want to allow or deny access to a topic in addition to the ALLOWEB* or DENYWEB* specifies. In that case having + as the first non-space character of ALLOWTOPIC* or DENYTOPIC* has that effect. For example, the following setting allows view by MarketingExecGroup in addition to the people ALLOWWEBVIEW allows.

• Set ALLOWTOPICVIEW = + Main.MarketingExecGroup

See "How TWiki evaluates ALLOW/DENY settings" below for more on how ALLOW and DENY interacts.

If the same setting is defined multiple times the last one overrides the previous. They are not OR'ed together.

Allowing public access to specific topics in a restricted web

You may want to completely open up access to a specific topic within a restricted web - allowing access by anybody. There is a special group for that - Main.AllUsersGroup. The following setting allows view access to the topic by anybody even if they are not authenticated.

• Set ALLOWTOPICVIEW = Main.AllUsersGroup

Alternatively, you can grant access only to authenticated users by Main.AllAuthUsersGroup. If an unauthenticated user accesses a topic having the following setting, they are asked to authenticate themself.

• Set ALLOWTOPICVIEW = Main.AllAuthUsersGroup

Remember when opening up access to specific topics within a restricted web that other topics in the web - for example, the WebLeftBar - may also be accessed when viewing the topics. The message you get when you are denied access should tell you what topic you were not permitted to access.

As mentioned in the following section, meaning of an empty value set to DENYTOPICVIEW, DENYTOPICCHANGE, and DENYTOPICRENAME has been changed in TWiki 6.0. To keep those TWiki topics having empty DENYTOPICOPERAION accessible by everybody, those need to be replaced with

• Set ALLOWTOPICOPERATION = Main.AllUsersGroup

For that, tools/eliminate_emptydenytopic is provided. After upgrading from pre 6.0 to post 6.0, you need to run it.

Empty values in access control variables

Setting an empty value to an access control variable is the same as not setting at all:

• Set ALLOWTOPICVIEW =

Since TWiki 4.0 and prior to TWiki 6.0 setting DENYTOPICVIEW, DENYTOPICCHANGE, or DENYTOPICRENAME to an empty value meant "do not deny anyone regardless of the corresponding ALLOWTOPICX", which is no longer the case. Back then, setting an empty value to DENYTOPICX was the only way to open up a topic to everybody in a restricted web. Now that we have AllUsersGroup and AllAuthUsersGroup, there is no need for that behaviour, which caused a lot of confusion and debate.

Securing File Attachments

By default, TWiki does not secure file attachments. Without making the following changes to the twiki.conf file, it is possible for anyone who has access to the server to gain access to an attachment if they know the attachment's fully qualified path, even though access to the topic associated with the attachment is secured. This is because attachments are referred to directly by Apache, and are not by default delivered via TWiki scripts. This means that the above instructions for controlling to topics do not apply to attachments unless you make the changes as described below.

An effective way to secure attachments is to apply the same access control settings to attachments as those applied to topics. This security enhancement can be accomplished by instructing the webserver to redirect accesses to attachments via the TWiki viewfile script, which honors the TWiki access controls settings to topics. See the notes below for implications.

The preferred method to secure attachments is by editing the twiki.conf file to include:

    ScriptAlias /do          /filesystem/path/to/twiki/bin
    Alias       /pub/TWiki   /filesystem/path/to/twiki/pub/TWiki
    Alias       /pub/Sandbox /filesystem/path/to/twiki/pub/Sandbox
    ScriptAlias /pub         /filesystem/path/to/twiki/bin/viewfile

Notes:

• It is recommended to use TWiki:TWiki/ApacheConfigGenerator to generate the Apache config file for your TWiki.
• You will need to restart your Apache server after this change.
• Images embedded in topics will load slower since attached images will also be delivered by the viewfile script. The TWiki web and Sandbox web are excluded for performance reasons.
• The viewfile script sets the mime type based upon file name suffix. Unknown types are served as text/plain which can result in corrupt files.

Controlling who can manage top-level webs

Top level webs are a special case, because they don't have a parent web with a WebPreferences. So there has to be a special control just for the root level.

• You can define these settings in the TWikiPreferences topic, preferable towards the end of the topic:
  • Set DENYROOTCHANGE = < comma-delimited list of Users and Groups >
  • Set ALLOWROOTCHANGE = < comma-delimited list of Users and Groups >

How TWiki evaluates ALLOW/DENY settings

When deciding whether to grant access, TWiki evaluates the following rules in order (read from the top of the list; if the logic arrives at PERMITTED or DENIED that applies immediately and no more rules are applied). You need to read the rules bearing in mind that VIEW, CHANGE and RENAME access may be granted/denied separately.

1. If the user is an administrator
   • access is PERMITTED.
2. If DENYTOPIC is set to a list of wikinames
   • people in the list will be DENIED.
3. If DENYTOPIC is set to empty ( i.e. Set DENYTOPIC = )
   • the access control setting is ignored.
     Attention: The spec changed in TWiki-6.0; access was permitted in earlier TWiki releases.
4. If ALLOWTOPIC is set
   1. people in the list are PERMITTED
   2. everyone else is DENIED
5. If DENYWEB is set to a list of wikinames
   • people in the list are DENIED access
6. If ALLOWWEB is set to a list of wikinames
   • people in the list will be PERMITTED
   • everyone else will be DENIED
7. If you got this far, access is PERMITTED

Allowing web creation/deletion/rename by user mapping manager

There are cases where DENYROOTCHANGE, ALLOWROOTCHANGE, DENYWEBCHANGE, and ALLOWWEBCHANGE, and DENYWEBCHANGE are not capable enough to implement web creation and rename permissions you want. To cope with such cases, when a new web is created, the canCreateWeb($cUID, $web) method of the user mapping manager is called if it exists. If it returns true, TWiki goes ahead and create the web without checking access control variables. Similarly, when a web is renamed (deletion is a form of rename), the canRenameWeb($cUID, $oldWeb, $newWeb) method of the user mapping manager is called if it exists. Please read AllowWebCreateByUserMappingManager for more details.

Forbid certain users to do certain actions by configuration

You may have an unruly registered users (e.g. a crawler program) who don't follow the rules while you don't have control over such users. And the web application container in which TWiki is installed may be managed by somebody else and you don't have tight and quick control.

To cope with such situations, certain users can be forbidden certain scripts by setting {ForbidUserAction}. A good example is worth more than a lengthy explanation, so here it is:

$TWiki::cfg{ForbidUserAction} = '
    AggresiveCrawler: edit, oops, search;
    ReadOnlyUser:     !view, viewfile;
    TotallyForbidden: !nothing;
';

• AggresiveCrawler is forbidden edit, oops, and search scripts.
• ReadOnlyUser is permitted view and viewfile but forbidden the others.
  • If a script list is preceded by !, only the listed scripts are permitted for the user. ! at the beginning of the list negates the list.
• TotallyForbidden is forbidden all actions.
  Here's the logic. There is no script named nothing, which means all scripts don't match "nothing", hence all scripts are forbidden.

• Spaces, tabs, new lines are ignored
• It consists of semicolon separated list of per-user specifications
• A specification consists of a user name, colon, and a comma separated list of scripts
• A user name needs to be in the canonical form. In most cases the canonical user name is the same as the wiki name. But if you are using non-standard user mapping, the canonical user name of a user is different from the wiki name.

User masquerading

There are cases where it's handy to access TWiki on behalf of somebody else retaining a trace of your real identity rather than completely becoming a different user. We call it user masquerading. TWiki provides a framework to implement that. Please read UserMasquerading for more information.

This is an advanced feature and not many TWiki sites are using, but there is a part in the following section mentioning it, it's mentioned here.

Dynamic access control

There are pitfalls and you need to harden your web to avoid unexpected access. Before using this feature, please read this entire section through carefully.

You may want to restrict access dynamically -- based on topic name, a form field value, or some combination of factors. To cope with such situations, the dynamic access control mechanism is provided. If you set DYNAMIC_ACCESS_CONTROL 'on' at WebPreferences of the web, TWiki variables in access control variables mentioned above are expanded.

Example 1 - restriction based on topic name

Let's assume you need to restrict changes only to the CroniesGroup members except with topics whose name ends with Public, which need be changed by anybody. That is achieve by the following settings on WebPrefences.

   * Set DYNAMIC_ACCESS_CONTROL = on
   * Set ALLOWWEBCHANGE = %IF{"'%CALCULATE{$SUBSTRING(%TOPIC%, -6, 6)}%' = 'Public'" then="%WIKINAME%" else="CroniesGroup"}%

Example 2 - restriction based on form field

Let's assume:

• a web storing requests on topics whose name starts with ReqEnt
• Each request topic has a form field "Requestor", which has the wiki name of the requestor
• Users can view only requests they created
• The members of the SupportGroup mail group can view all requests

   * Set DYNAMIC_ACCESS_CONTROL = on
   * Set ALLOWWEBVIEW = %IF{"'%CALCULATE{$SUBSTRING(%TOPIC%, 1, 6)}%' = 'ReqEnt' and '%FORMFIELD{Requestor}%' != '%WIKINAME%'" then="SupportGroup" else="%WIKINAME%"}%

Specifically the following access control variables are subject to TWiki variable expansion in their values.

• DENYTOPIC* (e.g. DENYTOPICVIEW, DENYTOPICCHANGE)
• ALLOWTOIPC*
• DENYWEB*
• ALLOWWEB*

Dynamic access control in accessing a different web's topic

Let's assume WebA has the following lines on WebPreferences.

   * Set DYNAMIC_ACCESS_CONTROL = on
   * Set MEMBERS = JaneSmith, JoeSchmoe
   * Set ALLOWWEBVIEW = %MEMBERS%

You may think the following lines cheat the access control on WebA but actually not.

   * Set MEMBERS = %WIKINAME%
%INCLUDE{WebA.TopicB}%

Topic level dynamic access control

On a topic, it's possible to use a variable defined on the topic for topic level access restriction. E.g.

   * Set MEMBERS = JaneSmith, JoeSchmoe
   * Set ALLOWTOPICVIEW = %MEMBERS%

Dynamic access control and user masquerading

Your user mapping handler may be providing the UserMasquerading feature. In that case, you expect dynamic access control to just work when user masquerading is in effect. Otherwise, you cannot test if your dynamic access control configuration is working as expected on your own.

Dynamic access control does work as expected even if user masquerading is in effect. For that, the following things are happening under the hood.

Let's think about Example 2 mentioned above. When you masquerading as SomebodyElse, you need to be able to see SomebodyElse's requests only. In the access control setting, a form field value is compared with %WIKINAME%. While user masquerading is in effect, your wiki name is YourNameOnBehalfOfSomebodyElse. It cannot match the form field value.

To make dynamic access control work under these circumstances, variable expansion for dynamic access control is skewed as follows. Specifically, the following variables are expanded to the value of SomeboyElse's rather than YourNameOnBehalfOfSomebodyElse's.

• WIKINAME
• USERNAME
• WIKIUSERNAME

Avoiding vulnerability

By default, user level preferences are read before web level preferences. This means a user can set a preferences variable at the user level and finalise it. To prevent this sort of attack, you need to harden your web or site by disabling user preferences by e.g. having the following line on lib/LocalSite.cfg

$TWiki::cfg{DemoteUserPreferences}= 1;

   * Set DENYUSERPREFEENCES = all

Again by default, predefined variables such as %IF{...}% can be overridden by preferences variables. If user preferences are disabled, ordinary users cannot attack using user preferences, but topic level preferences may cause unexpected consequences. As such, all predefined variables need to be made un-overridable by having the following line on WebPreferences and then finalise OVERRIDABLEPREDEFINEDVARIABLES.

   * Set OVERRIDABLEPREDEFINEDVARIABLES =

Disabling dynamic access control

You may not be comfortable with dynamic access control because it may slow things down. Or you may not want to be bothered by questions raised by users about it. If so, you can disable it by setting DYNAMIC_ACCESS_CONTROL 'off' and then finalizing at the local site level. (cf. TWikiVariables)

Access control and INCLUDE

ALLOWTOPICVIEW and ALLOWTOPICCHANGE only applies to the topic in which the settings are defined. If a topic A includes another topic B, topic A does not inherit the access rights of the included topic B.

Examples: Topic A includes topic B

• If the included topic B has ALLOWTOPICCHANGE set to block editing for a user, it does not prevent editing the including topic A.
• If the included topic B has ALLOWTOPICVIEW set to block view for a user, the user can still view topic A but he cannot see the included topic B. He will see a message No permission to view B

Customizing "access denied" message

When access is denied, a page as follows is displayed:

You may want to customize the passage annotated in the red rectangle. For example, with a web restricting access, you may want to show the link to an access request form.

You can achieve that by setting TOPIC_ACCESS_CONTACT varialbe on WebPreferences. e.g.

   * Set TOPIC_ACCESS_CONTACT = If you need to access this site, please apply [[Main.AccessForm][here]]

Custom user/group notations

You can have custom user/group notations such as USER:userid and LDAPGROUP:group-name and use them for access control. For example:

   * Set ALLOWWEBCHANGE = USER:buzz, LDAPGROUP:foo-bar

Access Control quick recipes

Restrict Access to Whole TWiki Site

In a firewalled TWiki, e.g. an intranet wiki or extranet wiki, you want to allow only invited people to access your TWiki. There are three options:

1. Install TWiki Behind Firewall:

The firewall takes care of giving access to TWiki to authorized people only. This is a typical setup for a company wiki. As for TWiki configuration, no special setup is needed.

2. Extranet TWiki Using Template Login:

All TWiki content (pages and attachments) need to be access controlled. The Template Login allows users to login and logout. Only logged in users can access TWiki content.

Configuration: Follow the default setup, then change these configure settings:

• Secure attachments as documented. The TWiki:TWiki.ApacheConfigGenerator is useful to get the setting right.
• Require authentication for all TWiki scripts except backuprestore, configure, login, logon and resetpasswd with the following configure setting:
  $TWiki::cfg{AuthScripts} = 'attach, changes, edit, manage, oops, preview, rdiff, rdiffauth, register, rename, rest, save, search, twiki_cgi, upload, statistics, view, viewauth, viewfile';
• When you install additional plugins make sure to add scripts they might introduce also to twiki/bin also to the {AuthScripts} configure setting.
  Attention: Some scripts of additional plugins might not be aware of TWiki's template login. Test all new scripts with a non-authenticated user!

3. Extranet TWiki Using Apache Login:

All TWiki content (pages and attachments) need to be access controlled. The Apache Login does not offer a logout; typically the browser needs to be restarted to logout. Only logged in users can access TWiki content.

Configuration: Enable user authentication with ApacheLogin and lock down access to the whole twiki/bin and twiki/pub directories to all but valid users. In the Apache config file for TWiki (twiki.conf or .htaccess), replace the <FilesMatch "(attach|edit|... section with this:

<FilesMatch ".*">
       require valid-user
</FilesMatch>

Notes:

• In all three options, content can be restricted selectively with ALLOWWEBVIEW and other access control settings documented above. See also the next quick recipe.
• In the extranet setup, someone with access to the site needs to register new users. If you still want public users to be able to register automatically follow TWiki:TWiki.RegisterOnViewRestrictedSite.

Authenticate and Restrict Selected Webs Only

Use the following setup to provide unrestricted viewing access to open webs, with authentication only on selected webs. Requires TWikiUserAuthentication to be enabled.

1. Restrict view access to selected Users and Groups. Set one or both of these variables in its WebPreferences topic:
   • Set DENYWEBVIEW = < list of Users and Groups >
   • Set ALLOWWEBVIEW = < list of Users and Groups >
   • Note: DENYWEBVIEW is evaluated before ALLOWWEBVIEW. Access is denied if the authenticated person is in the DENYWEBVIEW list, or not in the ALLOWWEBVIEW list. Access is granted if DENYWEBVIEW and ALLOWWEBVIEW are not defined.

Hide Control Settings

Tip: To hide access control settings from normal browser viewing, you can put them into the topic preference settings by clicking the link Edit topic preference settings under More topic actions menu. Preferences set in this manner are not visible in the topic text, but take effect nevertheless. Access control settings added as topic preference settings are stored in the topic meta data and they override settings defined in the topic text.

Alternatively, place them in HTML comment markers, but this exposes the access setting during ordinary editing.

<!--
   * Set DENYTOPICCHANGE = Main.SomeGroup
-->

Obfuscating Webs

Another way of hiding webs is to keep them hidden by not publishing the URL and by preventing the all webs search option from accessing obfuscated webs. Do so by enabling the NOSEARCHALL variable in WebPreferences:

• Set NOSEARCHALL = on

This setup can be useful to hide a new web until content its ready for deployment, or to hide view access restricted webs.

Note: Obfuscating a web without view access control is very insecure, as anyone who knows the URL can access the web.

Read-only Skin Mode

It is possible to turn the PatternSkin and TopMenuSkin into read-only mode by removing the edit and attach controls (links and buttons). This is mainly useful if you have TWiki application pages or dashboards where you do not want regular users to change content. The read-only skin mode is not a replacement for access control; you can use it in addition to access control. Details at PatternSkinCustomization.

Configuring access control for topics of a certain name in all webs

You may need to restrict access to topics of a certain name in all webs. For example, there might be an add-on refering to a certain topic of all webs. And the add-on does things only administrators are supposed to do. In that case, change to the topic needs to be restricted only to administrators and must not be overridable.

Let's say there is AutomationAddOn which refers to WebAutomation of all webs. And WebAutomation needs to be modifable only by administrators. That can be achieved by the following configuration.

$TWiki::cfg{Access}{Topic}{WebAutomation} = {
    DENYCHANGE => 'Main.AllUsersGroup',
};

In addition to ALLOWCHANGE, you can sepcify DENYCHANGE, ALLOWVIEW, DENYVIEW, ALLOWRENAME, and DENYRENAME as follows.

$TWiki::cfg{Access}{Topic}{SpecialTopic} = {
    DENYVIEW  => 'JoeSchmoe',
    ALLOWVIEW => 'FooGroup',
};

$TWiki::cfg{Access}{Topic}{TOPICNAME} has precedence over DENYTOPIC* and ALLOWTOPIC*. For example, if the configuration for WebAutomation is there as above, there is no way to allow non-adminsitrators to change the WebAutomation topic of any web.

As a way to configure access control, this may look crude. The reason why configured this way is that this can be part of plugin/add-on/contrib's configuration. For example, Config.spec of AutomationAddOn would have the following lines, with which proper access control to WebAutomation topics is implemented without the administrator knowing it.

$TWiki::cfg{Access}{Topic}{WebAutomation} = {
    DENYCHANGE => 'Main.AllUsersGroup',
};

Back to top

TWiki Text Formatting

These instructions are for contributors who prefer to use the Raw Edit over the default WYSIWYG editor. Working in TWiki is as easy as typing in text. You don't need to know HTML, though you can use it if you prefer. Links to topics are created automatically when you enter WikiWords. And TWiki shorthand gives you all the power of HTML with a simple coding system that takes no time to learn. It's all laid out below.

TWiki Editing Shorthand

Formatting Command:	You write:	You get:
Paragraphs: Blank lines will create new paragraphs.	1st paragraph 2nd paragraph	1st paragraph 2nd paragraph
Headings: Three or more dashes at the beginning of a line, followed by plus signs and the heading text. One plus creates a top level heading, two pluses a second level heading, etc. The maximum heading depth is 6. You can create a table of contents with the %TOC% variable. If you want to exclude a heading from the TOC, put !! after the ---+. Empty headings are allowed and won't appear in the table of contents.	---++ Sushi ---+++ Maguro ---+++!! Not in TOC	Sushi Maguro Not in TOC
Bold Text: Words get shown in bold by enclosing them in * asterisks.	*Bold*	Bold
Italic Text: Words get shown in italic by enclosing them in _ underscores.	_Italic_	Italic
Bold Italic: Words get shown in bold italic by enclosing them in __ double-underscores.	__Bold italic__	Bold italic
Fixed Font: Words get shown in fixed font by enclosing them in = equal signs.	=Fixed font=	Fixed font
Bold Fixed Font: Words get shown in bold fixed font by enclosing them in double equal signs.	==Bold fixed==	Bold fixed
You can follow the closing bold, italic, or other (* _ __ = ==) indicator with normal punctuation, such as commas and full stops. Make sure there is no space between the text and the indicators. All words enclosed by the indicators need to be on the same line.	_This works_, _this does not _ _this fails too_	This works, _this does not _ _this fails too_
Separator (Horizontal Rule): Three or more three dashes at the beginning of a line..	-------
Bulleted List: Multiple of three spaces, an asterisk, and another space. For all the list types, you can break a list item over several lines by indenting lines after the first one by at least 3 spaces.	* level 1 * level 2 * back on 1 * A bullet broken over three lines * last bullet	level 1 level 2 back on 1 A bullet broken over three lines last bullet
Icon List: Multiple of three spaces, an asterisk, text icon:name and another space. Use the name of any TWikiDocGraphics icon.	* icon:tip Icon list * icon:led-red Full * icon:led-green OK * icon:unchecked Item 1 * icon:checked Item 2 * icon:empty No bullet	Icon list Full OK Item 1 Item 2 No bullet
Numbered List: Multiple of three spaces, a type character, a dot, and another space. Several types are available besides a number: Type Generated Style Sample Sequence 1. Arabic numerals 1, 2, 3, 4... A. Uppercase letters A, B, C, D... a. Lowercase letters a, b, c, d... I. Uppercase Roman Numerals I, II, III, IV... i. Lowercase Roman Numerals i, ii, iii, iv...	1. Sushi 1. Dim Sum 1. Fondue A. Sushi A. Dim Sum A. Fondue i. Sushi i. Dim Sum i. Fondue	Sushi Dim Sum Fondue Sushi Dim Sum Fondue Sushi Dim Sum Fondue
Definition List: Three spaces, a dollar sign, the term, a colon, a space, followed by the definition. Deprecated syntax: Three spaces, the term with no spaces, a colon, a space, followed by the definition.	$ Sushi: Japan $ Dim Sum: S.F.	Sushi Japan Dim Sum S.F.
Table: Each row of the table is a line containing of one or more cells. Each cell starts and ends with a vertical bar '|'. Any spaces at the beginning of a line are ignored. | *bold* | header cell with text in asterisks |   center-aligned   | cell with two or more spaces on both sides. The number of spaces may be different between sides |      right-aligned | cell with two or more spaces on the left and one or zero space on the right | 2 colspan || and multi-span columns with multiple |'s right next to each other |^| cell with caret indicating follow-up row of multi-span rows |>> ... <<| cell enclosed in double-square brackets can span multiple lines - useful for bullets and nested tables You can split rows over multiple lines by putting a backslash '\' at the end of each line Contents of table cells wrap automatically as determined by the browser Use %VBAR% or &#124; to add | characters in tables. Use %CARET% or &#94; to add ^ characters in tables. The TablePlugin provides the |^| multiple-span row functionality, |>> ... <<| multi-line syntax, and additional rendering features	| *L* | *C* | *R* | | A2 | B2 | C2 | | A3 | B3 | C3 | | multi span ||| | A5-7 | 5 | 5 | |^| six | six | |^| seven | seven | | split\ | over\ | 3 lines | | A9 |>> | Nested | | table | <<| C9 |	L C R A2 B2 C2 A3 B3 C3 multi span A5-7 5 5 six six seven seven split over 3 lines A9 Nested table C9
WikiWord Links: CapitalizedWordsStuckTogether (or WikiWords) will produce a link automatically if preceded by whitespace or parenthesis. If you want to link to a topic in a different web write Otherweb.TopicName. To link to a topic in a subweb write Otherweb.Subweb.TopicName. The link label excludes the name of the web, e.g. only the topic name is shown. As an exception, the name of the web is shown for the WebHome topic. Dots '.' are used to separate webs and subwebs from topic names and therefore cannot be used in topic names. Links can be prevented with an ! exclamation point prefix. It's generally a good idea to use the TWikiVariables %SYSTEMWEB% and %USERSWEB% instead of TWiki and Main.	WebStatistics Sandbox.WebNotify Sandbox.WebHome Sandbox.Subweb.TopicName !EscapedWikiWord	WebStatistics WebNotify WebHome TopicName EscapedWikiWord
Anchors: You can define a reference inside a TWiki topic (called an anchor name) and link to that. To define an anchor write #AnchorName at the beginning of a line. The anchor name must be a WikiWord of no more than 32 characters. To link to an anchor name use the [[MyTopic#MyAnchor]] syntax. You can omit the topic name if you want to link within the same topic.	[[WikiWord#NotThere]] [[#MyAnchor][Jump]] #MyAnchor To here	WikiWord Jump To here
External Links: URLs starting with file, ftp, gopher, http, https, irc, mailto, news, nntp and telnet are linked automatically if preceded by whitespace or parenthesis. External links are indicated with a trailing icon, and open up in a new browser tab or window; the behavior of both can be set in configure or preferences variables (see TWikiExternalLinks for details). Links can be prevented with an ! exclamation point prefix.	http://twiki.org https://google.com !http://escaped-link	http://twiki.org https://google.com http://escaped-link
Forced Links: Use double square brackets to create forced links: Write [[link]] or [[link][label]] to force a link. Use the former for singleton words and if automatic linking is disabled. Use the latter one to specify a link label other than the link. For the link, you can use internal link references (e.g. WikiWords) and URLs (e.g. http://TWiki.org/). URL parameters can follow a WikiWord Anchor names can be added to create a link to a specific place in a document. To "escape" double square brackets that would otherwise make a link, prefix the leading left square bracket with an exclamation point. The topic title instead of the topic name is shown for [[WikiWord]] links if the SHOWTOPICTITLELINK preferences setting is enabled.	[[WikiWord]] [[WikiWord?n1=v1;n2=v2]] [[WikiWord#TheAnchor]] [[WikiWord?n=5#TheAnchor]] [[WikiSyntax][wiki syntax]] [[http://gnu.org/][GNU]] [[Singleton]] escaped: ![[WikiSyntax]]	WikiWord WikiWord WikiWord WikiWord wiki syntax GNU Singleton escaped: [[WikiSyntax]]
Topic Title Links: Use double square brackets and a plus sign to create links with topic title: Write [[+TopicName]] or [[+Web.TopicName]] to show the topic title instead of the topic name. The topic title is defined by the form field named "Title", the topic preferences setting named TITLE, or the topic name if neither exists. An alternative syntax is [[TopicName][$topictitle]] or [[Web.TopicName][$topictitle]].	[[+BugN1234]] [[+Bugs.BugN1234]] [[BugN1234][$topictitle]]	The sky is falling The sky is falling The sky is falling
Refer to Topic or Attachment Name in Double Square Brackets: $name in the link label in the double square brackets notation refers to the topic name or the attachment file name. $name is used for consistency with QuerySearch, in which name refers to the topic name and the attachment file name, respectively.	[[%SYSTEMWEB%.WikiWord\ #TheSyntax][$name]] [[%PUBURL%/%WEB%/WabiSabi\ /wabisabi.gif][$name]]	WikiWord wabisabi.gif
Prevent a Link: Prevent a WikiWord from being linked by prepending it with an exclamation point.	!RedHat	RedHat
Disable Links: You can disable automatic linking of WikiWords by surrounding text with <noautolink> and </noautolink> tags. It is possible to turn off all auto-linking with a NOAUTOLINK preferences setting.	<noautolink> RedHat & SuSE </noautolink>	RedHat & SuSE
Mailto Links: E-mail addresses are linked automatically. To create e-mail links that have more descriptive link text, specify subject lines or message bodies, or omit the e-mail address, you can write [[mailto:user@domain][descriptive text]].	a@b.com [[mailto:a@b.com]\ [Mail]] [[mailto:?subject=\ Hi][Hi]]	a@b.com Mail Hi
Twitter Links: @twitter IDs are linked automatically. The link rule is defined by the {Links}{TwitterUrlPattern} configure setting.	@twiki !@escaped	@twiki @escaped
Verbatim Text: Surround code excerpts and other formatted text with <verbatim> and </verbatim> tags. The verbatim tag disables HTML code. Use <pre> and </pre> tags instead if you want the HTML code within the tags to be interpreted. Preferences variables (* Set NAME = value) are set within verbatim tags.	<verbatim> class CatAnimal { void purr() { <code here> } } </verbatim>	class CatAnimal { void purr() { <code here> } }
Literal Text: TWiki generates HTML code from TWiki shorthand. Experts surround anything that must be output literally in the HTML code, without the application of TWiki shorthand rules, with <literal>..</literal> tags. Any HTML within literal tags must be well formed i.e. all tags must be properly closed before the end of the literal block. TWiki Variables are expanded within literal blocks.	<literal> | Not | A | Table | <literal>	| Not | A | Table |
Protected Text: Experts protect text from mangling by WYSIWYG editors using <sticky>..</sticky> tags. Sticky tags don't have any effect on normal topic display; they are only relevant when content has to be protected from a WYSIWYG editor (usually because it isn't well-formed HTML, or because it is HTML that WYSIWYG would normally filter out or modify). Protected content appears as plain text in the WYSIWYG editor.	<sticky> <div> This div is required </div> </sticky>	This div is required

Using HTML, CSS and JavaScript

You can use most HTML tags in TWiki topics without a problem. This is useful where you want to add some content that is formatted in a way that is not supported using TWiki shorthand, for example, you can write <strike>deleted text</strike> to get deleted text.

There are a few usability and technical considerations to keep in mind:

• On collaboration pages, it's better not to use HTML, but to use TWiki shorthand instead - this keeps the text uncluttered and easy to edit using the plaintext editor.
• If you must use HTML, use XHTML 1.0 Transitional syntax.
• Use <literal>..</literal> tags around blocks of HTML to avoid accidental interpretation of TWiki shorthand within the HTML.
• Script tags may be filtered out, at the discretion of your TWiki administrator.

Recommendations when pasting HTML from other sources (using the plain-text editor):

• Copy only text between <body> and </body> tags.
• Remove all empty lines. TWiki inserts <p /> paragraph tags on empty lines, which causes problems if done between HTML tags that do not allow paragraph tags, like for example between table tags.
• Remove leading spaces. TWiki might interpret some text as lists.
• Do not span a tag over more than one line. TWiki requires that the opening and closing angle brackets - <...> - of a HTML tag are on the same line, or the tag will be broken.
• In your HTML editing program, save without hard line breaks on text wrap.

When using a WYSIWYG editor, you can just copy-paste directly into the editor, and the content will be converted to TWiki shorthand automatically when you save.

It is also possible to add Cascading Style Sheets (CSS) and JavaScript code to TWiki pages, which can be used to make TWiki application more interactive. To prevent TWiki from interpreting some text as markup, it can be enclosed in HTML-escaped <pre>-tags.

<!-- <pre> -->
<script language="javascript">
<!--
  // put your JavaScript code here
//-->
</script>
<!-- </pre> -->

<!-- <pre> -->
<style type="text/css">
  /* put your CSS code here */
</style>
<!-- </pre> -->

Hyperlinks

Being able to create links without any special formatting is a core TWiki feature, made possible with WikiWords and inline URLs.

Internal Links

• GoodStyle is a WikiWord that links to the GoodStyle topic located in the current web.

• NotExistingYet is a topic waiting to be written because it is a red-link. Create the topic by clicking on the link. (Try clicking, but then, Cancel - creating the topic would wreck this example!)

External Links

• http://..., https://..., ftp://..., gopher://..., news://..., file://..., telnet://... and mailto:...@... are linked automatically.

• Write [[URL][label]] to get an external link with a descriptive text for the link, such as [[http://google.com/][Google home page]] to get Google home page.

• E-mail addresses like name@domain.com are linked automatically.

TWiki Variables

TWiki Variables are names enclosed in percent signs that are that are expanded to some other text when the topic is displayed. For example, %TOPIC% is expanded to TWikiDocumentation. Some variables can take arguments in curly braces - for example, %INCLUDE{"OtherTopic" arg="value"}%.

Many TWiki variables are built-in, and others are predefined for your convenience. TWikiVariables describes how you can also define your own TWiki Variables at the entire site, individual web, or individual topic level. Variables are fully expanded before any of the TWiki text formatting rules are applied.

Commonly used variables:

• %TOC% : Automatically generates a table of contents based on headings in a topic - see the top of this page for an example.
• %WEB% : The current web, is TWiki.
• %TOPIC% : The current topic name, is TWikiDocumentation.
• %ATTACHURL% : The attachment URL of the current topic. Example usage: If you attach a file to a topic you can refer to it as %ATTACHURL%/image.gif to show the URL of the file or the image in your text.
• %INCLUDE{"SomeTopic"}% : Server side include, includes another topic. The current web is the default web. Example: %INCLUDE{"TWiki.SiteMap"}%
• %SEARCH{"sushi"}% : Inline search showing the search result embedded in a topic. FormattedSearch gives you control over formatting, used to create web-based applications.
• Documentation Graphics: There are many graphics available to use in your topics. Use %ICON{"help"}%, %ICON{"tip"}%, and %ICON{"warning"}% to get: , , and , respectively.
• Use the TWiki Variables Wizard to find and compose variables.
• See all TWiki Variables.

To "escape" a variable, prefix it with an exclamation mark. Write: !%SOMEVARIABLE% to get: %SOMEVARIABLE%.

TWikiPlugin Formatting Extensions

Plugins can extend the functionality of TWiki into many other areas. There are a huge number of TWiki plugins available from the Plugins web on TWiki.org.

Currently enabled plugins on this TWiki installation, as listed by %PLUGINDESCRIPTIONS%:

• SpreadSheetPlugin (2018-07-05, $Rev: 30478 (2018-07-16) $): Add spreadsheet calculation like "$SUM( $ABOVE() )" to TWiki tables or anywhere in topic text
• ActionTrackerPlugin (2017-08-05, $Rev: 30633 (2019-01-23) $): Adds support for action tags in topics, and automatic notification of action statuses
• AutoViewTemplatePlugin (2011-05-14, $Rev: 21260 (2011-05-14) $): Automatically sets VIEW_TEMPLATE and EDIT_TEMPLATE
• BackupRestorePlugin (2018-07-10, $Rev: 30551 (2018-07-10) $): Administrator utility to backup, restore and upgrade a TWiki site
• BreadCrumbsPlugin (2010-08-01, $Rev: 19303 (2010-08-01) $): A flexible way to display breadcrumbs navigation
• ColorPickerPlugin (2018-07-05, $Rev: 30442 (2018-07-16) $): Color picker, packaged for use in TWiki forms and TWiki applications
• CommentPlugin (2018-07-05, $Rev: 30444 (2018-07-05) $): Quickly post comments to a page without an edit/preview/save cycle
• DBCachePlugin (2.1, $Rev: 19283 (2010-07-30) $): Lightweighted frontend to the DBCacheContrib to query cached TWiki content
• DatePickerPlugin (2018-07-05, $Rev: 30446 (2018-07-05) $): Pop-up calendar with date picker, for use in TWiki forms, HTML forms and TWiki plugins
• EditTablePlugin (2018-07-22, $Rev: 30625 (2018-07-22) $): Edit TWiki tables using edit fields, date pickers and drop down boxes
• FilterPlugin (2010-07-25, $Rev: 19240 (2010-07-25) $): Substitute and extract information from content by using regular expressions
• FormQueryPlugin (TWiki-4, $Rev: 15561 (12 Dec 2008) $): Provides query capabilities across a database defined using forms and embedded tables in TWiki topics.
• GluePlugin (2.1, $Rev: 18553 (2010-04-30) $): Enable markup to span multiple lines
• GuidPlugin: (disabled)
• HeadlinesPlugin (2018-07-13, $Rev: 30560 (2018-07-16) $): Show headline news in TWiki pages based on RSS and ATOM news feeds from external sites
• IfDefinedPlugin (v1.1, $Rev: 18548 (2010-04-29) $): Render content conditionally
• InterwikiPlugin (2018-07-05, $Rev: 30454 (2018-07-16) $): Write ExternalSite:Page to link to a page on an external site based on aliases defined in a rules topic
• JQueryPlugin (2018-07-05, $Rev: 30456 (2018-07-05) $): jQuery JavaScript library for TWiki
• JQueryTwistyPlugin (2010-07-25, $Rev: 19236 (2010-07-25) $): Twisty section JavaScript library to open/close content dynamically
• NotificationPlugin (2017-08-05, $Rev: 30635 (2019-01-23) $): This plugin allows you to send fine grained notifications of topics you are interested in
• PreferencesPlugin (2018-07-05, $Rev: 30528 (2018-07-16) $): Allows editing of preferences using fields predefined in a form
• QRCodePlugin (2018-07-17, $Rev: 30621 (2018-07-17) $): Create QR Code (a matrix barcode) in TWiki pages, useful for mobile applications
• SendMailPlugin (2016-01-19, $Rev: 29910 (2016-01-20) $): Send e-mail from actions in TWiki topics, useful for workflow automation
• SetGetPlugin (2018-07-05, $Rev: 30472 (2018-07-16) $): Set and get variables and JSON objects in topics, optionally persistently across topic views
• SlideShowPlugin (2018-07-05, $Rev: 30474 (2018-07-16) $): Create web based presentations based on topics with headings.
• SmiliesPlugin (2018-07-05, $Rev: 30476 (2018-07-16) $): Render smilies as icons, like  :-)  as or  :eek:  as
• TWikiSheetPlugin (2019-09-25, $Rev: 30675 (2019-09-25) $): Add TWiki Sheet spreadsheet functionality to TWiki tables
• TablePlugin (2018-07-05, $Rev: 30480 (2018-07-06) $): Control attributes of tables and sorting of table columns
• TagMePlugin (2018-07-05, $Rev: 30482 (2018-07-16) $): Tag wiki content collectively or authoritatively to find content by keywords
• TinyMCEPlugin (2018-07-10, $Rev: 30541 (2018-07-10) $): Integration of the Tiny MCE WYSIWYG Editor
• TopicCreatePlugin (2014-11-07, $Rev: 28434 (2014-11-07) $): Automatically create a set of topics and attachments at topic save time
• TreePlugin (2015-08-12, $Rev: 29430 (2015-08-12) $): Dynamically generate TWiki topic trees based on the parent-child relationship of topics
• TwistyPlugin (2018-07-06, $Rev: 30497 (2018-07-16) $): Twisty section JavaScript library to open/close content dynamically
• UserInfoPlugin (2010-07-25, $Rev: 19259 (2010-07-25) $): Render information about users on a TWiki site
• WatchlistPlugin (2018-07-10, $Rev: 30536 (2018-07-10) $): Watch topics of interest and get notified of changes by e-mail
• WysiwygPlugin (2018-07-06, $Rev: 30643 (2019-05-01) $): Translator framework for WYSIWYG editors

Check on current Plugin status and settings for this site in TWikiPreferences.

Common Editing Errors

TWiki formatting rules are fairly simple to use and quick to type. However, there are some things to watch out for, taken from the TextFormattingFAQ:

• Q: Text enclosed in angle brackets like <filename> is not displayed. How can I show it as it is?
  • A: The '<' and '>' characters have a special meaning in HTML, they define HTML tags. You need to escape them, so write '<' instead of '<', and '>' instead of '>'.
    Example: Type 'prog <filename>' to get 'prog <filename>'.

• Q: Why is the '&' character sometimes not displayed?
  • A: The '&' character has a special meaning in HTML, it starts a so-called character entity, e.g. '©' is the © copyright character. You need to escape '&' to see it as it is, so write '&' instead of '&'.
    Example: Type 'This & that' to get 'This & that'.

Related topics: WikiSyntax, WikiWord, WikiNotation, TextFormattingRules, TWikiEditingShorthand, TWikiRenderingShortcut, TWikiShorthand, TWikiVariablesQuickStart

Back to top

TWiki Variables

Special text strings expand on the fly to display dynamic content, such as user data or system info

TWikiVariables are text strings - %VARIABLE% or %VARIABLE{ parameter="value" }% - that expand into content whenever a topic is rendered for viewing. There are two types of variables:

1. Preferences variables: Can be defined and changed by the user.
   Example: %T% renders as
2. Predefined variables: Defined by the TWiki system or by extensions.
   Example: %CALCULATE{}% is handled by the SpreadSheetPlugin

See list of all TWiki Variables currently defined in this TWiki installation.

TWiki Variables Wizard — to Find and Compose Variables

Categories: all Administration Applications & Components Attachments & Files Charting & Drawing Database & Forms Date & Time Development Editing & Content Update Email & Notification Export & Publishing Formatting & Rendering Import Linking & Navigation Searching & Listing Security & Access Control Skins & Templates System Information Tables & Spreadsheets UI& Visualization Users & Authentication Workflow & Automation

Variables:

Pre-load image:

Using Variables

To use a variable type its name. For example,

• type %T% to get (a preferences variable)
• type %TOPIC% to get TWikiVariables (a predefined variable)
• type %CALCULATE{ "$UPPER(Text)" }% to get TEXT (a variable defined by a plugin)

Note:

• To leave a variable unexpanded, precede it with an exclamation point, e.g. type !%TOPIC% to get %TOPIC%
• Variables are expanded relative to the topic they are used in, not the topic they are defined in
• Type %ALLVARIABLES% to get a full listing of all variables defined for a particular topic

Variable Names

Variable names must start with a letter, optionally followed by letters, numbers and underscore '_' characters. Both upper-case and lower-case characters can be used, %MYVAR%, %MyVar%, %My2ndVar%, and %My_Var% are valid names. Variables are case sensitive, e.g. %MyVAR% and %MYVAR% are not the same.

By convention all settings, predefined variables and variables handled by extensions are always UPPER-CASE.

Preferences Variables

Unlike predefined variables, preferences variables can be defined by the user in various places.

Setting Preferences Variables

You can set variables in all the following places:

1. system level in TWikiPreferences
2. plugin topics (see TWikiPlugins)
3. local site level in Main.TWikiPreferences
4. user level in individual user topics in Main web
   • If UserSubwebs is in effect, the topic specified by %USERPREFSTOPIC% in the user's subweb is read instead
   • If $TWiki::cfg{DemoteUserPreferences} is true, this step is deferred to a later step. On this TWiki installation, $TWiki::cfg{DemoteUserPreferences} is false
5. web level in WebPreferences of each web
6. If EXTRAPREFERENCES is defined at this point, it's regarded as having comma separated list of topics. Those topics are read in the listed order as if they were WebPreferences
7. topic level in topics in webs
8. session variables (if sessions are enabled)
9. user level preferences are set at this point if $TWiki::cfg{DemoteUserPreferences} is true as mentioned at the step 4

Settings at higher-numbered levels override settings of the same variable at lower numbered levels, unless the variable was included in the setting of FINALPREFERENCES at a lower-numbered level, in which case it is locked at the value it has at that level.

If you are setting a variable and using it in the same topic, note that TWiki reads all the variable settings from the saved version of the topic before it displays anything. This means you can use a variable anywhere in the topic, even if you set it somewhere inconspicuous near the end. But beware: it also means that if you change the setting of a variable you are using in the same topic, preview will show the wrong thing, and you must save the topic to see it correctly.

The syntax for setting variables is the same anywhere in TWiki (on its own TWiki bullet line, including nested bullets):
[multiple of 3 spaces] * [space] Set [space] VARIABLENAME [space] = [space] value

Examples:

   * Set VARIABLENAME1 = value
      * Set VARIABLENAME2 = value

Spaces between the = sign and the value will be ignored. You can split a value over several lines by indenting following lines with spaces - as long as you don't try to use * as the first character on the following line.

Example:

   * Set VARIABLENAME = value starts here
     and continues here

Whatever you include in your variable will be expanded on display, exactly as if it had been entered directly.

Example: Create a custom logo variable

• To place a logo anywhere in a web by typing %MYLOGO%, define the Variable on the web's WebPreferences topic, and upload a logo file, ex: mylogo.gif. You can upload by attaching the file to WebPreferences, or, to avoid clutter, to any other topic in the same web, e.g. LogoTopic. Sample variable setting in WebPreferences:

      * Set MYLOGO = %PUBURL%/%WEB%/LogoTopic/mylogo.gif

You can also set preferences variables on a topic by clicking the link Edit topic preference settings under More topic actions. Use the same * Set VARIABLENAME = value syntax. Preferences set in this manner are not visible in the topic text, but take effect nevertheless.

Controlling User Level Preferences Override

By default, user level variables are set at the step 4 as stated in the previous section. That means a user can finalise some preferences variables so that web level or topic level setting cannot override it. This may result in a situation the web or page owner doesn't expect. $TWiki::cfg{DemoteUserPreferences} has been introduced to avoid it. If it's set to true, user level variables are set at the last step instead of the step 4.

But this is not enough. To guarantee a certain result, you need to finalise critical preferences variables set at the web or topic level, which is cumbersome. So preferences variables DENYUSERPREFEENCES and ALLOWUSERPREFERENCES have been introduced.

• DENYUSERPREFEENCES and ALLOWUSERPREFERENCES may have comma separated list of variable names
• If a preferences variable is listed in DENYUSERPREFEENCES, the variable cannot be overridden at the user level. There is a special value "all", which means no preferences variables can be overridden at the user level
• If ALLOWUSERPREFERENCES is set and not empty, only the listed preferences variables can be overridden. There is a special value "all", which means any preferences variable can be overridden at the user level. But actually, "all" is not necessary since a blank value or not setting ALLOWUSERPREFERENCES has the same effect
• DENYUSERPREFEENCES takes precedence over ALLOWUSERPREFERENCES. If a variable is listed on both, it cannot be overridden. If DENYUSERPREFEENCES is "all", the value of ALLOWUSERPREFERENCES doesn't matter.

   * Set DENYUSERPREFERENCES = all

   * Set ALLOWUSERPREFERENCES = TINYMCEPLUGIN_DISABLE, SKIN

   * Set DENYUSERPREFERENCES = TINYMCEPLUGIN_DISABLE, SKIN

You will get the most benefit of DENYUSERPREFEENCES and ALLOWUSERPREFERENCES by setting $TWiki::cfg{DemoteUserPreferences} to true. That way, each web can specify how much user level preferences overriding is allowed.

Parameterized Variables (Macros)

It is possible to pass parameters to TWiki variables. This is called a macro in a programming language.

To define a parameterized variable, set a variable that contains other variables, such as:

   * Set EXAMPLE = Example variable using %DEFAULT%, %PARAM1% and %PARAM2%
   * Set DEMO = Demo using %DEFAULT{ default="(undefined)" }%,
                %PARAM1{ default="(undefined)" }% and %PARAM2{ default="(undefined)" }%

A special %DEFAULT% variable denotes the default (nameless) parameter of the calling variable. Variables optionally may list a default="..." parameter that gets used in case the calling variable does not specify that parameter.

To use a parameterized variable (or call a macro), add parameters within the curly brackets, such as:

   * %EXAMPLE{ "foo" PARAM1="bar" PARAM2="baz" }%
   * %DEMO{ "demo" PARAM2="parameter 2" }% -- note that PARAM1 is missing

• %EXAMPLE{ "foo" PARAM1="bar" PARAM2="baz" }%
• %DEMO{ "demo" PARAM2="parameter 2" }% -- note that PARAM1 is missing

Parameters in the variable definition are expanded using the following sequence:

1. Parameter from variable call. In above example, %PARAM1% gets expanded to bar.
2. Session variable and preferences settings

Example

Define variables:

   * Set DRINK = red wine
   * Set FAVORITE = My %DEFAULT{default="favorite"}% dish is %DISH{default="steak"}%,
                    my %DEFAULT{default="favorite"}% drink is %DRINK%.

Use Variables:

%FAVORITE{ DISH="Sushi" DRINK="Sake" }%

%FAVORITE{}%

%FAVORITE{ "preferred" }%

Access Control Variables

These are special types of preferences variables to control access to content. TWikiAccessControl explains these security settings in detail.

Local values for variables

Certain topics (a users home topic, web site and default preferences topics) have a problem; variables defined in those topics can have two meanings. For example, consider a user topic. A user may want to use a double-height edit box when they are editing their home topic - but only when editing their home topic. The rest of the time, they want to have a normal edit box. This separation is achieved using Local in place of Set in the variable definition. For example, if the user sets the following in their home topic:

   * Set EDITBOXHEIGHT = 10
   * Local EDITBOXHEIGHT = 20

Use this powerful feature with great care! %ALLVARIABLES% can be used to get a listing of the values of all variables in their evaluation order, so you can see variable scope if you get confused.

Frequently Used Preferences Variables

The following preferences variables are frequently used. They are defined in TWikiPreferences:

• %BB% - line break and bullet combined
• %BB2% - level 2 bullet with line break
• %BB3% - level 3 bullet with line break
• %BB4% - level 4 bullet with line break
• %BR% - line break
• %BULLET% - bullet sign
• %CARET% - caret symbol
• %VBAR% - vertical bar
• %H% - Help icon
• %I% - Idea icon
• %M% - Moved to icon
• %N% - New icon
• %P% - Refactor icon
• %Q% - Question icon
• %S% - Pick icon
• %T% - Tip icon
• %U% - Updated icon
• %X% - Alert icon
• %Y% - Done icon
• %RED% text %ENDCOLOR% - colored text (also %YELLOW%, %ORANGE%, %PINK%, %PURPLE%, %TEAL%, %NAVY%, %BLUE%, %AQUA%, %LIME%, %GREEN%, %OLIVE%, %MAROON%, %BROWN%, %BLACK%, %GRAY%, %SILVER%, %WHITE%)
• %REDBG% text %ENDBG% - colored background (also %YELLOWBG%, %ORANGEBG%, %PINKBG%, %PURPLEBG%, %TEALBG%, %NAVYBG%, %BLUEBG%, %AQUABG%, %LIMEBG%, %GREENBG%, %OLIVEBG%, %MAROONBG%, %BROWNBG%, %BLACKBG%, %GRAYBG%, %SILVERBG%, %WHITEBG%)

There are additional useful preferences variables defined in TWikiPreferences, in TWikiPreferences, and in WebPreferences of every web.

Predefined Variables

Most predefined variables return values that were either set in the configuration when TWiki was installed, or taken from server info (such as current username, or date and time). Some, like %SEARCH%, are powerful and general tools.

• Show all TWiki Variables
• Predefined variables can be overridden by preferences variables (except a few such as TOPIC and WEB)
  • This has long been the case but may not be desirable since even something as fundamental as %IF{...}%, %SCRIPT{...}%, and %INCLUDE{...}% can be overridden
  • So TWiki-6.0.1 has introduced a way to protect predefined variables from being overridden by preferences variables
  • The preferences variable OVERRIDABLEPREDEFINEDVARIABLES having a comma separated list of predefined variables specifies which predefined variables are overridable
  • By default, it's set to "all" (set at TWikiPreferences), which means any predefined variable can be overridden, which is for compatibility with prior releases. You can set it to a different value in TWikiPreferences and you may finalise it
  • If it's set as below, all predefined variables are protected

       * Set OVERRIDABLEPREDEFINEDVARIABLES =
    

  • If it's set as below, DATE and LANGUAGE predefined variables can be overridden but all the other predefined variables cannot

       * Set OVERRIDABLEPREDEFINEDVARIABLES = DATE, LANGUAGE
    

• Extensions may extend the set of predefined variables (see individual extension topics for details)
• Take the time to thoroughly read through ALL preference variables. If you actively configure your site, review variables periodically. They cover a wide range of functions, and it can be easy to miss the one perfect variable for something you have in mind. For example, see %INCLUDINGTOPIC%, %INCLUDE%, and the mighty %SEARCH%.

Search or List Variables by Category

All TWiki Variables: ACTIVATEDPLUGINS, ADDTOHEAD, ALLVARIABLES, AQUA, ATTACHURL, ATTACHURLPATH, AUTHREALM, BASETOPIC, BASEWEB, BB, BB2, BB3, BB4, BLACK, BLUE, BR, BROWN, BUBBLESIG, BULLET, CALC, CALCULATE, CARET, CHILDREN, COLORPICKER, COMMENT, CONTENTMODE, COPY, DASHBOARD, DATE, DATEPICKER, DISPLAYTIME, DISPLAYTIME2, EDITACTION, EDITFORM, EDITFORMFIELD, EDITTABLE, ENCODE, ENDBG, ENDCOLOR, ENDCOLUMNS, ENDSECTION, ENTITY, ENV, EXAMPLEVAR, FAILEDPLUGINS, FORM, FORMFIELD, FOURCOLUMNS, GET, GMTIME, GMTIME2, GRAY, GREEN, GROUPS, H, HEADLINES, HIDE, HIDEINPRINT, HOMETOPIC, HTTP, HTTPHOST, HTTPS, I, ICON, ICONURL, ICONURLPATH, IF, INCLUDE, INCLUDINGTOPIC, INCLUDINGWEB, JQENDTAB, JQENDTABPANE, JQTAB, JQTABPANE, LANGUAGE, LANGUAGES, LAQUO, LIME, LOCALSITEPREFS, LOGIN, LOGINURL, LOGOUT, LOGOUTURL, M, MAINWEB, MAKETEXT, MAROON, MDREPO, META, METASEARCH, N, NAVY, NBSP, NOP, NOTIFYTOPIC, OLIVE, ORANGE, P, PARENTBC, PARENTTOPIC, PINK, PLUGINDESCRIPTIONS, PLUGINVERSION, PUBURL, PUBURLPATH, PURPLE, Q, QRCODE, QUERYPARAMS, QUERYSTRING, RAQUO, RED, REDBG, REG, REMOTEADDR, REMOTEPORT, REMOTEUSER, RENDERLIST, REVINFO, REVINFO2, S, SCRIPTNAME, SCRIPTSUFFIX, SCRIPTURL, SCRIPTURL2, SCRIPTURLPATH, SCRIPTURLPATH2, SEARCH, SENDMAIL, SERVERTIME, SERVERTIME2, SESSIONID, SESSIONVAR, SESSIONVARIABLE, SET, SETGETDUMP, SILVER, SITENAME, SITESTATISTICSTOPIC, SLIDESHOWEND, SLIDESHOWSTART, SPACEDTOPIC, SPACEOUT, STARTINCLUDE, STARTSECTION, STATISTICSTOPIC, STOPINCLUDE, SYSTEMWEB, T, TABLE, TEAL, THREECOLUMNS, TM, TOC, TOC2, TOPIC, TOPICLIST, TOPICTITLE, TOPICURL, TWIKISHEET, TWIKIWEB, TWISTY, TWOCOLUMNS, U, URLPARAM, USERINFO, USERNAME, USERREPORT, USERSIG, USERSWEB, VAR, VBAR, WEB, WEBLIST, WEBPREFSTOPIC, WHITE, WIKIHOMEURL, WIKILOGOALT, WIKILOGOIMG, WIKILOGOURL, WIKINAME, WIKIPREFSTOPIC, WIKITOOLNAME, WIKIUSERNAME, WIKIUSERSTOPIC, WIKIVERSION, WIKIWEBMASTER, WIKIWEBMASTERNAME, WIP, X, Y, YELLOW, total 192 variables

Documenting TWiki Variables

This section is for people documenting TWiki variables of the TWiki core and TWiki extensions.

Each variable is documented in a topic named Var<name> in the TWiki web. For example, a %LIGHTSABER% variable has a documentation topic called VarLIGHTSABER. The topic is expected to have a specific format so that reports in this TWikiVariables topic, in TWikiVariablesSearch and in category topics work as expected.

Basic structure of a variable documentation topic:

• Parent set to TWikiVariables
• An anchor named the same like the topic, such as #VarLIGHTSABER
• A ---+++ (level 3) heading with variable name, --, short description
• A bullet with description of the variable (optional)
• A Syntax: bullet with example syntax
• A Parameters: bullet with a table explaining the parameters (optional)
• An Example: bullet or two with examples
• An Expands to: bullet with expanded variable (optional)
• A Note: bullet with notes (optional)
• A Category: bullet with one or more of the TWiki variables categories:
  AdministrationVariables, ApplicationsAndComponentsVariables, AttachmentsAndFilesVariables, ChartingAndDrawingVariables, DatabaseAndFormsVariables, DateAndTimeVariables, DevelopmentVariables, EditingAndContentUpdateVariables, EmailAndNotificationVariables, ExportAndPublishingVariables, FormattingAndRenderingVariables, ImportVariables, LinkingAndNavigationVariables, SearchingAndListingVariables, SecurityAndAccessControlVariables, SkinsAndTemplatesVariables, SystemInformationVariables, TablesAndSpreadsheetsVariables, UIAndVisualizationVariables, UsersAndAuthenticationVariables, WorkflowAndAutomationVariables
• A Related: bullet with related links. Links have conditional IF so that links work properly locally in variable documentation topics and in the TWikiVariables topic

Example content of a VarLIGHTSABER topic:

#VarLIGHTSABER
---+++ LIGHTSABER -- laser sword to fend of unethical competition
   * The =%<nop>LIGHTSABER{}%= variable is handled by the LightsaberPlugin.
   * Syntax: =%<nop>LIGHTSABER{ _parameters_ }%=
   * Parameters:
     | *Parameter* | *Description* | *Default* |
     | =color="..."= | Color: =red=, =glue=, =green= | =white= |
     | =sound="..."= | Sound: =none=, =standard=, =loud= | =none= |
   * Example: =%<nop>LIGHTSABER{ color="red" }%= shows a red Lightsaber
   * Expands to: =%LIGHTSABER{ color="red" }%=
   * Note: The Lightsaber is a fictional weapon in the Star Wars universe, a "laser sword."
   * Category: FormattingAndRenderingVariables, UIAndVisualizationVariables
   * Related: [[%IF{"'%INCLUDINGTOPIC%'='TWikiVariables'" then="#"}%VarPLASMA][PLASMA]], LightsaberPlugin

Back to top

TWiki Formatted Search

Inline search feature allows flexible formatting of search result

The default output format of a %SEARCH{...}% is a table consisting of topic names and topic summaries. Use the format="..." parameter to customize the search result. The format parameter typically defines a bullet or a table row containing variables, such as %SEARCH{ "food" format="| $topic | $summary |" }%. See %SEARCH{...}% for other search parameters, such as separator="".

Syntax

Three parameters can be used to customize a search result:

1. header="..." parameter

Use the header parameter to specify the header of a search result. It should correspond to the format of the format parameter. This parameter is optional.
Example: header="| *Topic:* | *Summary:* |"

Variables that can be used in the header string:

2. format="..." parameter

Use the format parameter to specify the format of one search hit.
Example: format="| $topic | $summary |"

Variables that can be used in the format string:

3. footer="..." parameter

Use the footer parameter to specify the footer of a search result. It should correspond to the format of the format parameter. This parameter is optional.
Example: footer="| *Topic* | *Summary* |"

Variables that can be used in the footer string:

4. default="..." parameter

Use the default parameter to specify a default message if there are no hits in a web. This parameter is optional.
Example: default="| *Note* | Nothing found in the [[$web.WebHome][$web]] web |"

Variables that can be used in the default string:

Results pagination

When a search return many results, you may want to paginate them having the following line below the results.

«Prev   1   2   3   4   5   Next»

SearchResultsPagination describes how to do it.

Evaluation order of variables

By default, variables embedded in the format parameter of %SEARCH{}% are evaluated once before the search. This is OK for variables that do not change, such as %SCRIPTURLPATH%. Variables that should be evaluated once per search hit must be escaped. For example, to escape a conditional:
    %IF{ "..." then="..." else="..." }%
write this:
    format="$percntIF{ \"...\" then=\"...\" else=\"...\" }$percnt"

Examples

Here are some samples of formatted searches. The SearchPatternCookbook has other examples, such as creating a picklist of usernames, searching for topic children and more.

Bullet list showing topic name and summary

Write this:

%SEARCH{
 "FAQ"
 scope="topic"
 nosearch="on"
 nototal="on"
 header="   * *Topic: Summary:*"
 format="   * [[$topic]]: $summary"
 footer="   * *Topic: Summary*"
}%

To get this:

• Topic: Summary:
• TextFormattingFAQ: Text Formatting FAQ This topics lists frequently asked questions on text formatting. Text formatting applies to people who edit TWiki pages in raw edit mode . TextFormattingRules...
• TWikiFAQ: Frequently Asked Questions About TWiki This is a real FAQ, and also a demo of an easily implemented knowledge base solution. To see how it`s done, view the source...
• TWikiFaqTemplate: FAQ: Answer: Back to: TWikiFAQ Contributors:
• Topic: Summary

Table showing form field values of topics with a form

In a web where there is a form that contains a TopicClassification field, an OperatingSystem field and an OsVersion field we could write:

| *Topic:* | *OperatingSystem:* | *OsVersion:* |
%SEARCH{ "[T]opicClassification.*?value=\"[P]ublicFAQ\"" scope="text" type="regex" nosearch="on" nototal="on" format="| [[$topic]] | $formfield(OperatingSystem) | $formfield(OsVersion) |" }%

To get this:

Extract some text from a topic using regular expression

Write this:

%SEARCH{
 "__Back to\:__ TWikiFAQ"
 scope="text"
 type="regex"
 nosearch="on"
 nototal="on"
 header="TWiki FAQs:"
 format="   * $pattern(.*?FAQ\:[\n\r]*([^\n\r]+).*) [[$topic][Answer...]]"
}%

To get this:

TWiki FAQs:

• How can I create a simple TWiki Forms based application? Answer...
• How do I delete or rename a file attachment? Answer...
• How do I delete or rename a topic? Answer...
• Why does the topic revision not increase when I edit a topic? Answer...
• Answer...
• TWiki is distributed under the GPL (GNU General Public License). What is GPL? Answer...
• I've problems with the WebSearch. There is no Search Result on any inquiry. By clicking the Index topic it's the same problem. Answer...
• What happens if two of us try to edit the same topic simultaneously? Answer...
• I would like to install TWiki on my server. Can I get the source? Answer...
• What does the "T" in TWiki stand for? Answer...
• So what is this WikiWiki thing exactly? Answer...
• Everybody can edit any page, this is scary. Doesn't that lead to chaos? Answer...

Nested Search

Search can be nested. For example, search for some topics, then form a new search for each topic found in the first search. The idea is to build the nested search string using a formatted search in the first search.

Here is an example. Let's search for all topics that contain the word "culture" (first search), and let's find out where each topic found is linked from (second search).

• First search:
  • %SEARCH{ "culture" format="   * $topic is referenced by: (list all references)" nosearch="on" nototal="on" }%
• Second search. For each hit we want this search:
  • %SEARCH{ "(topic found in first search)" format="$topic" nosearch="on" nototal="on" separator=", " }%
• Now let's nest the two. We need to escape the second search, e.g. the first search will build a valid second search string. Note that we escape the second search so that it does not get evaluated prematurely by the first search:
  • Use $percnt to escape the leading percent of the second search
  • Use \" to escape the double quotes
  • Use $dollar to escape the $ of $topic
  • Use $nop to escape the }% sequence

Write this:

%SEARCH{
 "culture"
 format="   * $topic is referenced by:$n      * $percntSEARCH{ \"$topic\" format=\"$dollartopic\" nosearch=\"on\" nototal=\"on\" separator=\", \" }$nop%"
 nosearch="on"
 nototal="on"
}%

To get this:

• ATasteOfTWiki is referenced by:
  • TWikiTemplates, TWikiTutorial, TWikiUsersGuide, WebLeftBar, WebTopMenu, WelcomeGuest
• FormattedSearch is referenced by:
  • ActionTrackerPlugin, AnApplicationWithWikiForm, AttachContentPlugin, BackupRestorePlugin, BreadCrumbsPlugin, DBCachePlugin, EditTablePlugin, EmptyPlugin, FilterPlugin, FormatTokens, FormQueryPlugin, GluePlugin, HeadlinesPlugin, IfDefinedPlugin, IfStatements, InterwikiPlugin, ManagingWebs, PreferencesPlugin, QRCodePlugin, QuerySearch, RegularExpression, RenderListPlugin, SearchHelp, SearchPatternCookbook, SearchResultsPagination, SendMailPlugin, SetGetPlugin, SlideShowPlugin, SmiliesPlugin, SpreadSheetPlugin, TagMePlugin, TopicCreatePlugin, TreePlugin, TWikiAccessControl, TWikiDocumentation, TWikiForms, TWikiHistory, TWikiMetaData, TWikiReferenceManual, TWikiReleaseNotes04x00, TWikiReleaseNotes04x01, TWikiScripts, TWikiSearchDotPm, TWikiSheetPlugin, TWikiSiteTools, TWikiTip018, TWikiTopics, TWikiUISearchDotPm, TWikiVariablesQuickStart, TwistyPlugin, UserInfoPlugin, VarCHILDREN, VarEDITFORM, VarEDITFORMFIELD, VarFORM, VarFORMFIELD, VarMETA, VarMETASEARCH, VarSEARCH, VarURLPARAM, WatchlistPlugin, WebHome, WebLeftBar, WebTopMenu, WelcomeGuest
• FormQueryPlugin is referenced by:
  • DBCacheContrib, FormQueryPlugin, MacrosPlugin
• TWikiAccessControl is referenced by:
  • AllowWebCreateByUserMappingManager, AutonomousWebs, CopyingTopics, CustomUserGroupNotations, EditTablePlugin, FileAttachment, MainFeatures, ManagingTopics, ManagingUsers, ManagingWebs, PatternSkinCustomization, SitePermissions, SourceCode, TagMePlugin, TWikiAccessControl, TWikiDocumentation, TWikiForms, TWikiFuncDotPm, TWikiHistory, TWikiInstallationGuide, TWikiPreferences, TWikiReferenceManual, TWikiReleaseNotes04x01, TWikiReleaseNotes04x02, TWikiReleaseNotes06x00, TWikiScripts, TWikiSiteTools, TWikiTopics, TWikiTutorial, TWikiUserAuthentication, TWikiVariables, UserMasquerading, VarHIDE, VarSEARCH, WebPreferences, WebPreferencesHelp, WikiCulture, WikiWord
• TWikiSite is referenced by:
  • AdminToolsCategory, InstantEnhancements, InterwikiPlugin, ManagingWebs, SiteMap, SiteStatisticsFooter, StartingPoints, TWikiAccessControl, TWikiDocumentation, TWikiGlossary, TWikiI18NDotPm, TWikiInstallationGuide, TWikiPreferences, TWikiReferenceManual, TWikiRegistration, TWikiReleaseNotes04x02, TWikiReleaseNotes05x00, TWikiReleaseNotes05x01, TWikiReleaseNotes06x00, TWikiScripts, TWikiSite, TWikiTopics, TWikiTutorial, TWikiUserAuthentication, TWikiUsersGuide, WabiSabi, WebHome, WebLeftBar, WebSiteTools, WebStatisticsFooter, WebTopMenu, WelcomeGuest, WhatDoesTWikiStandFor, WhatIsWikiWiki, WikiCulture, WikiReferences
• WabiSabi is referenced by:
  • TWikiEditingShorthand, TWikiSite, WabiSabi, WhatIsWikiWiki, WikiCulture, WikiReferences
• WhatIsWikiWiki is referenced by:
  • TWikiReleaseNotes04x00, WikiCulture, WikiReferences
• WikiCulture is referenced by:
  • TWikiAccessControl, TWikiSite, WabiSabi, WhatIsWikiWiki, WikiReferences
• WikiReferences is referenced by:
  • TWikiSite, WelcomeGuest

Note: Nested search can be slow, especially if you nest more then 3 times. Nesting is limited to 16 levels. For each new nesting level you need to "escape the escapes", e.g. write $dollarpercntSEARCH{ for level three, $dollardollarpercntSEARCH{ for level four, etc.

Note: Another option, instead of a nested search, is to create a hash. Refer to the blog TWiki:Blog.BlogEntry201603x1. A search using hashes, if possible, may be significantly faster than a nested search.

Most recently changed pages

Write this:

%SEARCH{
 "\.*"
 scope="topic"
 type="regex"
 nosearch="on"
 nototal="on"
 sort="modified"
 reverse="on"
 format="| [[$topic]] | $wikiusername  | $date |"
 limit="7"
}%=

To get this:

Search with conditional output

A regular expression search is flexible, but there are limitations. For example, you cannot show all topics that are up to exactly one week old, or create a report that shows all records with invalid form fields or fields within a certain range, etc. You need some additional logic to format output based on a condition:

1. Specify a search which returns more hits then you need
2. For each search hit apply a spreadsheet formula to determine if the hit is needed
3. If needed, format and output the result
4. Else supress the search hit

This requires the TWiki:Plugins.SpreadSheetPlugin. The following example shows all topics in the Main web that have been updated in the last 7 days.

Write this:

%CALCULATE{$SET(weekold, $TIMEADD($TIME(), -7, day))}%
%SEARCH{ "." scope="topic" type="regex" web="Main" nonoise="on" sort="modified" reverse="on" format="$percntCALCULATE{$IF($TIME($date) < $GET(weekold), <nop>, | [[$web.$topic][$topic]] | $wikiusername | $date | $rev |)}$percnt" limit="100" }%

• The first line sets the weekold variable to the serialized date of exactly one week ago
• The SEARCH has a deferred CALCULATE. The $percnt makes sure that the CALCULATE gets executed once for each search hit
• The CALCULATE compares the date of the topic with the weekold date
• If topic is older, a <nop> is returned, which gets removed at the end of the TWiki rendering process
• Otherwise, the search hit is formatted and returned
• This example is for illustration only, it is easier to use the date="..." paramter in SEARCH to restrict the date.

To get this:

The condition can be anything you like. To restrict search based on a date range it is easier to use the date="" parameter as shown in the next example.

Restrict search based on a date range

A search can be restricted based on a date range. The following example is identical to the previous one, showing all topics in the Main web that have been updated in the last 7 days.

Write this:

%SEARCH{
 "."
 scope="topic"
 type="regex"
 web="%USERSWEB%"
 nonoise="on"
 sort="modified"
 reverse="on"
 format="| [[$web.$topic][$topic]] | $wikiusername | $date | $rev |"
 limit="100"
 date="P1w/$today"
}%=

To get this:

Embedding search forms to return a formatted result

Use an HTML form and an embedded formatted search on the same topic. You can link them together with an %URLPARAM{"..."}% variable. Example:

Write this:

<form action="%SCRIPTURLPATH{"view"}%/%WEB%/%TOPIC%">
Find Topics: 
<input type="text" name="q" size="32" value="%URLPARAM{"q" encode="entity"}%" />&nbsp;<input type="submit" class="twikiSubmit" value="Search" />
</form>
Result:
%SEARCH{
 search="%URLPARAM{"q" encode="search"}%"
 type="keyword"
 format="   * $web.$topic: %BR% $summary"
 nosearch="on"
}%

To get this:

Related Topics: UserDocumentationCategory, SearchHelp, VarSEARCH, VarENCODE, SearchResultsPagination, SearchPatternCookbook, RegularExpression, QuerySearch

-- Contributors: TWiki:Main.PeterThoeny, TWiki:Main.CrawfordCurrie, TWiki:Main.SopanShewale

Back to top

File Attachments

Each topic can have one or more files of any type attached to it by using the Attach screen to upload (or download) files from your local PC. Attachments are stored under revision control: uploads are automatically backed up; all previous versions of a modified file can be retrieved.

What Are Attachments Good For?

File Attachments can be used to archive data, or to create powerful customized groupware solutions, like file sharing and document management systems, and quick Web page authoring.

Document Management System

• You can use Attachments to store and retrieve documents (in any format, with associated graphics, and other media files); attach documents to specific TWiki topics; collaborate on documents with full revision control; distribute documents on a need-to-know basis using web and topic-level access control; create a central reference library that's easy to share with an user group spread around the world.

File Sharing

• For file sharing, FileAttachments on a series of topics can be used to quickly create a well-documented, categorized digital download center for all types of files: documents; graphics and other media; drivers and patches; applications; anything you can safely upload!

Web Authoring

• Through your Web browser, you can easily upload graphics (or sound files, or anything else you want to link to on a page) and place them on a single page, or use them across a web, or site-wide.
  • NOTE: You can also add graphics - any files - directly, typically by FTP upload. This requires FTP access, and may be more convenient if you have a large number of files to load. FTP-ed files can't be managed using browser-based Attachment controls. You can use your browser to create TWikiVariables shortcuts, like this %H% = .

Uploading Files

• Click on the Attach link at the bottom of the page. The Attach screen lets you browse for a file, add a comment, and upload it. The uploaded file will show up in the File Attachment table.
  • NOTE: The topic must already exist. It is a two step process if you want to attach a file to a non-existing topic; first create the topic, then add the file attachment.
  • TWiki is capable of getting up to 10 files per upload session. Whether you can actually upload multiple files in one go from web user interface depends on skin.
  • Any type of file can be uploaded. Some files that might pose a security risk are renamed, ex: *.php files are renamed to *.php.txt so that no one can place code that would be read in a .php file.
  • The previous upload path is retained for convenience. In case you make some changes to the local file and want to upload it, again you can copy the previous upload path into the Local file field.
  • TWiki can limit the file size. This is defined by the %ATTACHFILESIZELIMIT% variable of the TWikiPreferences, currently set at 20000 KB.
    • It's not recommended to upload files greater than a few hundred K through a browser. Large files can be extremely slow-loading, and often time out. Use an FTP site for large file uploads.
• Automatic attachments:
  • When enabled, all files in a topic's attachment directory are shown as attachments to the topic - even if they were directly copied to the directory and never attached by using an 'Attach' link. This is a convenient way to quickly "attach" files to a topic without uploading them one by one; although at the cost of losing audit trail and version control.
  • To enable this feature, set the {AutoAttachPubFiles} configuration option.
  • NOTE: The automatic attachment feature can only be used by an administrator who has access to the server's file system.

Downloading Files

• Click on the file in the File Attachment table.

• NOTE: There is no access control on individual attachments. If you need control over single files, create a separate topic per file and set topic-level access restrictions for each.

Moving Attachment Files

An attachment can be moved between topics.

• Click Manage on the Attachment to be moved.
• On the control screen, select the new web and/or topic.
• Click Move. The attachment and its version history are moved. The original location is stored as topic Meta Data.

Deleting Attachments

Move unwanted Attachments to web Trash, topic TrashAttachment.

Linking to Attached Files

• Once a file is attached it can be referenced in the topic. Example:
  1. Attach file: Sample.txt
  2. Edit topic and enter: %ATTACHURL%/Sample.txt
  3. Preview: %ATTACHURL%/Sample.txt text appears as: /pub/TWiki/FileAttachment/Sample.txt, a link to the text file.

• To reference an attachment located in another topic, enter:
  • %PUBURLPATH%/%WEB%/OtherTopic/Sample.txt (if it's within the same web)
  • %PUBURLPATH%/Otherweb/OtherTopic/Sample.txt (if it's in a different web)

• Attached HTML files and text files can be inlined in a topic. Example:
  1. Attach file: Sample.txt
  2. Edit topic and write text: %INCLUDE{"%ATTACHURL%/Sample.txt"}%
     • Content of attached file is shown inlined.
     • Read more about INCLUDE in TWikiVariables

• GIF, JPG and PNG images can be attached and shown embedded in a topic. Example:
  1. Attach file: Smile.gif
  2. Edit topic and write text: %ATTACHURL%/Smile.gif
  3. Preview: text appears as /pub/TWiki/FileAttachment/Smile.gif, an image.

File Attachment Contents Table

Files attached to a topic are displayed in a directory table, displayed at the bottom of the page, or optionally, hidden and accessed when you click Attach.

Topic attachments

I	Attachment	History	Action	Size	Date	Who	Comment
txt	Sample.txt		manage	0.1 K	2000-07-22 - 19:37	TWikiContributor	Just a sample
gif	Smile.gif		manage	0.1 K	2000-07-22 - 19:38	TWikiContributor	Smiley face

File Attachment Controls

Clicking on a Manage link takes you to a new page that looks a bit like this (depending on what skin is selected):

• The first table is a list of all attachments, including their attributes. An h means the attachment is hidden, it isn't listed when viewing a topic.

• The second table is all the versions of the attachment. Click on View to see that version. If it's the most recent version, you'll be taken to an URL that always displays the latest version, which is usually what you want.
  • To change the comment on an attachment, enter a new comment and then click Change properties. Note that the comment listed against the specific version will not change, however the comment displayed when viewing the topic does change.
  • To hide/unhide an attachment, enable the Hide file checkbox, then click Change properties.

File names

File systems tend to be liberal about characters used in file names. But there are characters which may cause problems if they are used in a file name of a TWiki attachment. As such, when TWiki saves an uploaded file attachment, it's saved as a file whose name is cleansed to avoid problems. Specifically:

• Space are replaed by underscores
• The .txt extension is appended to some filenames for security reasons
• Characters such as ~, $, @, % are removed
• Non-ASCII characters are kept as they are

Known Issues

• Unlike topics, attachments are not locked during editing. As a workaround, you can change the comment to indicate an attachment file is being worked on - the comment on the specific version isn't lost, it's there when you list all versions of the attachment.
• Attachments are not secured by default. Anyone can read them if they know the name of the web, topic and attachment. Ask your TWiki administrator if TWiki is configured to secure attachments.

Back to top

TWiki Forms - Foundation of TWiki Applications

Add structure to content with forms attached to twiki topics. TWiki forms (with form fields) and formatted search are the base for building database applications.

Overview

By adding form-based input to free form content, you can structure topics with unlimited, easily searchable categories. A form is enabled for a web and can be added to a topic. The form data is shown in tabular format when the topic is viewed, and can be changed in edit mode using edit fields, radio buttons, check boxes and list boxes. Many different form types can be defined in a web, though a topic can only have one form attached to it at a time.

Typical steps to build an application based on TWiki forms:

1. Define a form template
2. Enable the form for a web
3. Add the form to a template topic
4. Build an HTML form to create new topics based on that template topic
5. Build a FormattedSearch to list topics that share the same form

Tip: The blog How to Create a TWiki Application on TWiki.org is a good tutorial to get started with TWiki forms based applications.

Defining a Form

A Form Template specifies the fields in a form. A Form Template is simply a page containing a TWiki table, where each row of the table specifies one form field.

1. Create a new topic with your form name: YourForm, ExpenseReportForm, InfoCategoryForm, RecordReviewForm, whatever you need.
   The name of a Form Template topic must end in Form.
2. Create a TWiki table, with each column representing one element of an entry field: Name, Type, Size, Values, Tooltip message, and Attributes (see sample below).
3. For each field, fill in a new line; for the type of field, select from the list.
4. Save the topic

Example:
| *Name* | *Type* | *Size* | *Values* | *Tooltip message* | *Attributes* |
| TopicClassification | select | 1 | NoDisclosure, PublicSupported, PublicFAQ | blah blah... |   |
| OperatingSystem | checkbox | 3 | OsHPUX, OsLinux, OsSolaris, OsWin | blah blah... |   |
| OsVersion | text | 16 | | blah blah... |   |

Name	Type	Size	Values	Tooltip message	Attributes
TopicClassification	select	1	NoDisclosure, PublicSupported, PublicFAQ	blah blah...
OperatingSystem	checkbox	3	OsHPUX, OsLinux, OsSolaris, OsWin	blah blah...
OsVersion	text	16		blah blah...

See structure of a form for full details of what types are available and what all the columns mean.

You can also retrieve possible values for select, checkbox or radio types from other topics:

Example:

• In the WebForm topic, define the form:
  

  Name	Type	Size	Values	Tooltip message	Attributes
  TopicClassification	select	1		blah blah...
  OperatingSystem	checkbox	3		blah blah...
  OsVersion	text	16		blah blah...

  
  Leave the Values field blank.

• Then in the TopicClassification topic, define the possible values:
  | *Name*            |
| NoDisclosure      |
| Public Supported  |
| Public FAQ        |
  

  Name
  NoDisclosure
  Public Supported
  Public FAQ

Field values can also be set using the result of expanding other TWiki variables. For example,

%SEARCH{"Office$" scope="topic" web="%USERSWEB%" nonoise="on" type="regex" format="$web.$topic" separator=", " }%

When used in the value field of the form definition, this will find all topic names in the Main web which end in "Office" and use them as the legal field values.

Adding a Form to a Topic

• To add a Form, follow the "More topic actions" link at the bottom of a topic, select "Add or Replace Form".
  • Select a Form Template topic. These are topics with names ending in Form that contain a Form Template table.
  • A Form is typically added to a template topic, either to the WebTopicEditTemplate topic in a web, or a new topic that serves as an application specific template topic.
  • Modify the template topic to set the initial Form values.

• Additionally a new topic can be given a Form using the formtemplate parameter in the (edit or save) URL. Initial values can then be provided in the URLs or as form values:
  • other than checkboxes: name, ex: ?BugPriority=1
  • checkbox: namevalue=1, ex: ?ColorRed=1.
    Boxes with a tick must be specified.
  • Example: This will add a textfield for the new topic name and a "Create"-Button to your topic. When the button is pressed, the topic editor will open with the form "MyForm" already attached to the new topic.

        <form name="newtopic" action="%SCRIPTURLPATH{"edit"}%/%WEB%/">
           <input type="hidden" name="formtemplate" value="MyForm" />
           New topic name <input type="text" name="topic" size="40" />
           <input type="submit" class="twikiSubmit" value="Create" />
        </form>
           

• Note: You can create a topic in one step, without going through the edit screen. To do that, specify the save script instead of the edit script in the form action. When you specify the save script you have to use the "post" method. Example:

      <form name="newtopic" action="%SCRIPTURLPATH{"save"}%/%WEB%/" method="post">
         .....
      </form>
         

• The edit and save scripts understand many more parameters, see TWikiScripts and TWikiScripts for details.

• Tip: For TWiki applications you can automatically generate unique topicnames.

• Note: Initial values will not be set in the form of a new topic if you only use the formtemplate parameter.

Changing a Form

• To change a Form, follow the "More topic actions" link at the bottom of a topic, select "Add or Replace Form", and select a new Form.

• You can change a form definition, and TWiki will try to make sure you don't lose any data from the topics that use that form.

• If you add a new field to the form, then it will appear next time you edit a topic that uses the form.

• If you delete a field from the form, or change a field name, then the data will not be visible when you edit the topic (the changed form definition will be used). If you save the topic, the old data will be lost (though thanks to revision control, you can always see it in older versions of the topic)

• If two people edit the same topic containing a form at exactly the same time, and both change fields in the form, TWiki will try to merge the changes so that no data is lost.

Structure of a Form Template

A Form Template specifies the fields in a form. A Form Template is simply a page containing a TWiki table, where each row of the table specifies one form field.

Each row of the table defines one element of an input field:

The Name, Type and Size columns are required. Other columns are optional. The form template must have a header row, e.g. at least | *Name* | *Type* | *Size* | is required. Columns:

• Name column: Name is the name of the form field.

• Type, Size, Value columns: Type, Size and Value describe the type, size and initial value of this form field. Type text, checkbox, select and more are described in the Form Field Types section below.

• Tooltip message column: The Tooltip message will be displayed when the cursor is hovered over the field in edit view.

• Attributes column: Attributes may contain additional key="value" form field attributes, separated by space.
  • A hidden="1" attribute indicates that this field is hidden, e.g. not shown in view mode. However, the field is available for editing and storing information. The deprecated H attribute has the same function, it is still supported but might be removed in a future TWiki release.
    Tip: The TWiki form header is suppressed in view mode if all fields of the form are hidden. For better usability it is good to hide the whole form if the display and interaction of all form fields is done externally. For example, the display and modification of form field values can be done in a header topic that is included in each page.
  • An mandatory="1" attribute indicates that this field is mandatory. The topic cannot be saved unless a value is provided for this field. If the field is found empty during topic save, an error is raised and the user is redirected to an oops page. Mandatory fields are indicated by an asterisks next to the field name. The deprecated M attribute has the same function, it is still supported but might be removed in a future TWiki release.
  • Additional form field type specific attributes can be used, such as onfocus="..." and spellcheck="..".

For example, a simple form just supporting entry of a name and a date would look as follows:

| *Name* | *Type* | *Size* |
| Name   | text   | 80     |
| Date   | date   | 30     |

Field Name Notes:

• Field names have to be unique.
• A very few field names are reserved. If you try to use one of these names, TWiki will automatically append an underscore to the name when the form is used.
• You can space out the title of the field, and it will still find the topic e.g. Aeroplane Manufacturers is equivalent to AeroplaneManufacturers.
• If a label field has no name, it will not be shown when the form is viewed, only when it is edited.
• Field names can in theory include any text, but you should stick to alphanumeric characters. If you want to use a non-wikiname for a select, checkbox or radio field, and want to get the values from another topic, you can use [[...]] links. This notation can also be used when referencing another topic to obtain field values, but a name other than the topic name is required as the name of the field.
• Leading and trailing spaces are not significant.

Field Value Notes:

• The field value will be used to initialize a field when a form is created, unless specific values are given by the topic template or query parameters. The first item in the list for a select or radio type is the default item. For label, text, and textarea fields the value may also contain commas. checkbox fields cannot be initialized through the form template.
• Leading and trailing spaces are not significant.
• Field values can also be generated through a FormattedSearch, which must yield a suitable table as the result.
• Variables in the initial values of a form definition get expanded when the form definition is loaded.
  • If you want to use a | character in the initial values field, you have to precede it with a backslash, thus: \|.
  • You can use <nop> to prevent TWiki variables from being expanded.
  • The FormatTokens can be used to prevent expansion of other characters.

General Notes:

• The topic definition is not read when a topic is viewed.
• Form definition topics can be protected in the usual manner, using TWikiAccessControl, to limit who can change the form template and/or individual value lists. Note that view access is required to be able to edit topics that use the form definition, though view access to the form definition is not required to view a topic where the form has been used.

Form Field Types

Each table row of a form template defines one element of an input field:

Many types of form fields are available. Some are TWiki internal, some are provided by extensions. Find more TWiki form field extensions on TWiki.org. The Size, Value and Attributes depend on the Type used. Form field types:

Type	Description	Size	Value
text	One-line text field	Text box width in number of characters	Initial (default) content
textarea	Multi-line text box	Columns x rows, such as 80x6; default is 40x5	Initial (default) content
label	Read-only text label		Text of the label
checkbox	One or more checkboxes that can be toggled individually	Number of checkboxes shown per line	Comma-space-separated list of item labels - can be a dynamic SEARCH
checkbox+buttons	Like checkbox, adding [Set] and [Clear] buttons
radio	Radio buttons, mutually exclusive; only one can be selected	Number of radio buttons shown per line	Comma-space-separated list of item labels - can be a dynamic SEARCH
combobox	Text field & select combination box, rendered as a text input field and a button to open up a selector box	Text box width in number of characters	Comma-space-separated list of options of the select box - can be a dynamic SEARCH
select	Select box, rendered as a picklist or a multi-row selector box depending on the size value	• 1: Show a picklist • Number > 1: Multi-row selector box of specified size • Range e.g. 3..10: Multi-row selector box with variable size - the box will never be smaller than 3 items, never larger than 10, and will be 5 high if there are only 5 options	Comma-space-separated list of options of the select box - can be a dynamic SEARCH
select+multi	Like select, turning multi-select on, to allow Shift+Click and Ctrl+Click to select (or deselect) multiple items
select+values	Like select, allowing definition of values that are different to the displayed text. An option is defined as value: title, where the value is the value passed on form submit, and title is the option text shown to the user. For example: | Field 9 | select+values | 3 | One, 2: Two, III: Three | Various values formats | shows OneTwoThree but the values of options Two and Three are 2 and III, respectively. A legacy title=value syntax is supported as well, for example: One, Two=2, Three=III.
select+multi+values	Combination of select+multi and select+values
color	Single-line text box and a color picker to pick a color. The color can also be typed into the text box, such as #123456. An attribute of type="popup" shows a button that, when clicked, opens a color picker popup.	Text box width in number of characters	Initial (default) color
date	Text input field and a button next to it to pick a date from a pop-up calendar. The date can also be typed into the text box.	Text box width in number of characters	Initial (default) date

Note on Attributes:

• Common attributes: hidden, mandatory, class, form, onblur, onfocus, onchange, onselect, onmouseover, onmouseout, spellcheck, style, tabindex, title, translate
• Type-specific attributes:
  • text type: id, max, maxlength, min, pattern, placeholder
  • textarea type: autocomplete, id, maxlength, minlength, pattern, placeholder, wrap
  • label type: id, max, maxlength, min
  • combobox type: max, maxlength, min, pattern, placeholder

Values in Other Topics

As described above, you can also retrieve possible values for select, checkbox or radio types from other topics. For example, if you have a rows defined like this:

| *Name*                 | *Type* | *Size* |
| AeroplaneManufacturers | select |        |

The AeroplaneManufacturers topic must contain a table, where each row of the table describes a possible value. The table only requires one column, Name. Other columns may be present, but are ignored.

For example:

| *Name* |
| Routan |
| Focke-Wulf |
| De Havilland |

Notes:

• The Values column must be empty in the referring form definition.

Using a form template on a different web

You can use a form template on a different web by specifying a form template in the WEB.TOPIC format.

In addition, you can put a comma separated list of webs in the TWIKIFORMPATH variable. It's referred to only when a form template is spcified without a web (TOPIC instead of WEB.TOPIC). The webs in TWIKIFORMPATH are examined in the listed order until the specified template is found.

TWIKIFORMPATH may contain TWiki variables. For example:

   * Set TWIKIFORMPATH = %APPLICATION_WEB%, %WEB%

If TWIKIFORMPATH is defined, the current web is examined only if all the webs listed in it don't have the form template.

Extending the range of form data types

You can extend the range of data types accepted by forms by using TWikiPlugins. All such extended data types are single-valued (can only have one value) with the following exceptions:

• any type name starting with checkbox
• any type name with +multi anywhere in the name

Hints and Tips

Editing Just Form Data, Without Topic Text

In some cases you want to change only the form data. You have the option of hiding the topic text with two methods:

• To display only the form whenever you edit a topic, set the preference variable EDITACTION to value form (see details).
• To change the edit action in a URL, add a action=form parameter to the edit URL string, such as
  %SCRIPTURL{edit}%/%BASEWEB%/%BASETOPIC%?t=%SERVERTIME{$epoch}%;action=form (see details).

Build an HTML Form to Create New Form-based Topics

New topics with a form are created by simple HTML forms asking for a topic name. For example, you can have a SubmitExpenseReport topic where you can create new expense reports, a SubmitVacationRequest topic, and so on. These can specify the required template topic with its associated form. Template topics has more.

A Form Template specifies the fields in a form. A Form Template is simply a page containing a TWiki table, where each row of the table specifies one form field.

Update Specific Form Fields

All the form fields are shown and can be updated when editing a topic that has a form. It is possible to have more control over the layout of a form, or update just a subset of the form fields by using a custom HTML form. For example, in a bug tracker, each topic would include a header topic that shows a form with some fields to update specific form fields of the bug item. Use the EDITFORMFIELD variable to easily create this form in the header topic. Example:

%EDITFORMFIELD{ "form" type="start" action="save" topic="%BASETOPIC%" }%
| Priority: | %EDITFORMFIELD{ "Priority" topic="%BASETOPIC%" }% |
| Status:   | %EDITFORMFIELD{ "Status"   topic="%BASETOPIC%" }% |
|  | %EDITFORMFIELD{ "form" type="submit" value="Update" }% |
%EDITFORMFIELD{ "LastUpdate" type="hidden" value="%SERVERTIME{$year-$mo-$day}%" }%
%EDITFORMFIELD{ "form" type="end" }%

Assuming the base topic has a BugForm with Priority and Status fields of type select, a LastUpdate field of type text, and some other fields. Above form shows a table with selectors for Priority and Status, and an Update button. On form submit, the Priority, Status and LastUpdate fields are updated in the base topic.

Searching for Form Data

TWiki Forms accept user-input data, stored as TWikiMetaData. Meta data also contains program-generated info about changes, attachments, etc. To find, format and display form and other meta data, see TWikiMetaData, EDITFORMFIELD, FORMFIELD, SEARCH and METASEARCH variables in TWikiVariables, and TWiki Formatted Search.

Example
TWiki users often want to have an overview of topics they contributed to. With the $formfield parameter it is easy to display the value of a classification field next to the topic link:

| *Topic* | *Classification* |
%SEARCH{"%USERSWEB%.UserName" scope="text" nosearch="on" nototal="on" sort="modified" reverse="on"
format="|<b>[[$web.$topic][$topic]]</b> |<nop>$formfield(TopicClassification) |" web="Sandbox"}%

Searching forms this way is obviously pretty inefficient, but it's easy to do. If you want better performance, take a look at some of the structured wiki extensions that support higher performance searching e.g. TWiki:Plugins.DBCachePlugin.

Gotcha!

• Some browsers may strip linefeeds from text fields when a topic is saved. If you need linefeeds in a field, make sure it is a textarea.

Back to top

TWiki Templates

Definition of the templates used to render all HTML pages displayed in TWiki

Overview

Templates are plain text with embedded template directives that tell TWiki how to compose blocks of text together, to create something new.

There are two types of template:

• Master Templates: Define the HTML used to display TWiki pages.
• Template Topics: Define default text when you create a new topic

Tip: TWiki:TWiki.TWikiTemplatesSupplement on TWiki.org has supplemental documentation on TWiki templates.

Master Templates

Master templates are also used in the definition of TWikiSkins.

Master templates are stored as text files with the extension .tmpl. They are usually HTML with embedded template directives. The directives are expanded when TWiki wants to generate a user interface screen.

How Template Directives Work

• Directives are of the form %TMPL:<key>% and %TMPL:<key>{"attr"}%.
• Directives:
  • %TMPL:INCLUDE{"file"}%: Includes a template file. The file is found as described below.
  • %TMPL:DEF{"block"}%: Define a block. All text between this and the next %TMPL:END% directive is removed and saved for later use with %TMPL:P.
  • %TMPL:END%: Ends a block definition.
  • %TMPL:P{"var"}%: Includes a previously defined block.
  • %{...}%: is a comment.
• Two-pass processing lets you use a variable before or after declaring it.
• Templates and TWikiSkins work transparently and interchangeably. For example, you can create a skin that overloads only the twiki.tmpl master template, like twiki.print.tmpl, that redefines the header and footer.
• Use of template directives is optional: templates work without them.
• NOTE: Template directives work only for templates: they do not get processed in normal topic text.

TMPL:P also supports simple parameters. For example, given the definition %TMPL:DEF{"x"}% x%P%z%TMPL:END% then %TMPL:P{"x" P="y"}% will expand to xyz.

Note that parameters can simply be ignored; for example, %TMPL:P{"x"}% will expand to x%P%z.

Any alphanumeric characters can be used in parameter names. You are highly recommended to use parameter names that cannot be confused with TWikiVariables.

Note that three parameter names, context, then and else are reserved. They are used to support a limited form of "if" condition that you can use to select which of two templates to use, based on a context identifier:

%TMPL:DEF{"link_inactive"}%<input type="button" disabled value="Link>%TMPL:END%
%TMPL:DEF{"link_active"}%<input type="button" onclick="link()" value="Link" />%TMPL:END%
%TMPL:P{context="inactive" then="inactive_link" else="active_link"}% for %CONTEXT%

Finding Templates

The master templates shipped with a twiki release are stored in the twiki/templates directory. As an example, twiki/templates/view.tmpl is the default template file for the twiki/bin/view script.

You can save templates in other directories as long as they are listed in the {TemplatePath} configuration setting. The {TemplatePath} is defined in the Miscellaneous section of the configure page.

You can also save templates in user topics (IF there is no possible template match in the templates directory). The {TemplatePath} configuration setting defines which topics will be accepted as templates.

Templates that are included with an explicit '.tmpl' extension are looked for only in the templates/ directory. For instance %TMPL:INCLUDE{"example.tmpl"}% will only return templates/example.tmpl, regardless of {TemplatePath} and SKIN settings.

The out-of-the-box setting of {TemplatePath} supports the following search order to determine which template file or topic to use for a particular script or %TMPL:INCLUDE{"script"}% statement. The skin path is set as described in TWikiSkins.

1. templates/web/script.skin.tmpl for each skin on the skin path
   • this usage is supported for compatibility only and is deprecated. Store web-specific templates in TWiki topics instead.
2. templates/script.skin.tmpl for each skin on the skin path
3. templates/web/script.tmpl
   • this usage is supported for compatibility only and is deprecated. Store web-specific templates in TWiki topics instead.
4. templates/script.tmpl
5. The TWiki topic aweb.atopic if the template name can be parsed into aweb.atopic
6. The TWiki topic web.SkinSkinScriptTemplate for each skin on the skin path
7. The TWiki topic web.ScriptTemplate
8. The TWiki topic %SYSTEMWEB%.SkinSkinScriptTemplate for each skin on the skin path
9. The TWiki topic %SYSTEMWEB%.ScriptTemplate

• script refers to the script name, e.g view, edit
• Script refers to the same, but with the first character capitalized, e.g View
• skin refers to a skin name, e.g dragon, pattern. All skins are checked at each stage, in the order they appear in the skin path.
• Skin refers to the same, but with the first character capitalized, e.g Dragon
• web refers to the current web

For example, the example template file will be searched for in the following places, when the current web is Thisweb and the skin path is print,pattern:

1. templates/Thisweb/example.print.tmpl deprecated; don't rely on it
2. templates/Thisweb/example.pattern.tmpl deprecated; don't rely on it
3. templates/example.print.tmpl
4. templates/example.pattern.tmpl
5. templates/Thisweb/example.tmpl deprecated; don't rely on it
6. templates/example.tmpl
7. Thisweb.PrintSkinExampleTemplate
8. Thisweb.PatternSkinExampleTemplate
9. Thisweb.ExampleTemplate
10. TWiki.PrintSkinExampleTemplate
11. TWiki.PatternSkinExampleTemplate
12. TWiki.ExampleTemplate

Template names are usually derived from the name of the currently executing script; however it is also possible to override these settings in the view and edit scripts, for example when a topic-specific template is required. Two preference variables can be used to override the templates used:

• VIEW_TEMPLATE sets the template to be used for viewing a topic
• EDIT_TEMPLATE sets the template for editing a topic.

Both VIEW_TEMPLATE and EDIT_TEMPLATE may contain TWiki variables, which are expanded. For example, the following setting causes Item* topics to be displayed with the custom view template ItemViewTmpl while the other topics are displayed normally.

   * Set VIEW_TEMPLATE = %IF{"'%CALCULATE{$SUBSTRING(%TOPIC%, 1, 4)}%' = 'Item'" then="ItemViewTmpl"}%

   * Set EDIT_TEMPLATE = %IF{"'%CALCULATE{$SUBSTRING(%TOPIC%, 1, 4)}%' = 'Item'" then="editform"}%

Tip: If you want to override existing templates, without having to worry that your changes will get overwritten by the next TWiki update, change the {TemplatePath} so that another directory, such as the %USERSWEB% appears at the front. You can then put your own templates into that directory or web and these will override the standard templates. (Note that such will increase the lookup time for templates by searching your directory first.)

TMPL:INCLUDE recursion for piecewise customization, or mixing in new features

If there is recursion in the TMPL:INCLUDE chain (eg twiki.classic.tmpl contains %TMPL:INCLUDE{"twiki"}%, the templating system will include the next twiki.SKIN in the skin path. For example, to create a customization of pattern skin, where you only want to over-ride the breadcrumbs for the view script, you can create only a view.yourlocal.tmpl:

%TMPL:INCLUDE{"view"}%
%TMPL:DEF{"breadcrumb"}% We don't want any crumbs %TMPL:END%

The default {TemplatePath} will not give you the desired result if you put these statements in the topic Thisweb.YourlocalSkinViewTemplate. The default {TemplatePath} will resolve the request to the template/view.pattern.tmpl, before it gets to the Thisweb.YourlocalSkinViewTemplate resolution. You can make it work by prefixing the {TemplatePath} with: $web.YourlocalSkin$nameTemplate.

Default master template

twiki.tmpl is the default master template. It defines the following sections.

Template Topics

The second type of template in TWiki are template topics. Template topics define the default text for new topics. There are four types of template topic:

When you create a new topic using the edit script, TWiki locates a topic to use as a content template according to the following search order:

1. A topic name specified by the templatetopic CGI parameter
   • if no web is specified, the current web is searched first and then the TWiki web
2. WebTopicEditTemplate in the current web
3. WebTopicEditTemplate in the Main web
4. WebTopicEditTemplate in the TWiki web

Variable Expansion

TWikiVariables located in template topics get expanded as follows when a new topic is created.

1. Default variable expansion

The following variables used in a template topic automatically get expanded when new topic is created based on it:

2. Preventing variable expansion

In a template topic, embed text that you do not want expanded inside a %STARTSECTION{type="templateonly"}% ... %ENDSECTION{type="templateonly"}% section. For example, you might want to write this in the template topic:

%STARTSECTION{type="templateonly"}%
This template can only be changed by:
   * Set ALLOWTOPICCHANGE = Main.TWikiAdminGroup
%ENDSECTION{type="templateonly"}%

%NOP% can be used to prevent expansion of TWiki variables that would otherwise be expanded during topic creation. For example, escape %SERVERTIME% with %SER%NOP%VERTIME%.

3. Causing variable expansion in a section

You can forcefully expand TWikiVariables by placing them inside a type="expandvariables" section in the template topic, such as:

 ...  

Example:

If you have the following content in a template topic:

   * %SYSTEMWEB%.ATasteOfTWiki - view a short introductory presentation on TWiki for beginners
   * %SYSTEMWEB%.WelcomeGuest - starting points on TWiki
   * %SYSTEMWEB%.TWikiUsersGuide - complete TWiki documentation
   * Sandbox.%HOMETOPIC% - try out TWiki on your own
   * Sandbox.%TOPIC%Sandbox - just for me

you will get this raw text in new topics based on that template topic:

   * TWiki.ATasteOfTWiki - view a short introductory presentation on TWiki for beginners
   * TWiki.WelcomeGuest - starting points on TWiki
   * TWiki.TWikiUsersGuide - complete TWiki documentation
   * Sandbox.WebHome - try out TWiki on your own
   * Sandbox.JimmyNeutronSandbox - just for me

4. Specifying variables to be expanded individually

You may want to mix variables to be expanded and variables not to be. By prepending a variable name with EOTC__ (EOTC followed by two underscores; EOTC stands for Expand On Topic Creation), you can have the variable expanded.

Here's an example.

%EOTC__SEARCH{"."
 topic="%URLPARAM{prefix}%*"
 nonoise="on"
 format="$percntINCLUDE{$topic}$percnt" separator="$n"
}%

Specifying a Form

When you create a new topic based on a template, you often want the new topic to have a form attached to it. You can attach a form to the template topic, in which case it will be copied into the new topic.

Sometimes this isn't quite what you want, as it copies all the existing data from the template topic into the new topic. To avoid this and use the default values specified in the form definition instead, you can use the formtemplate CGI parameter to the edit script to specify the name of a form to attach.

See TWikiScripts for information about all the other parameters to edit.

Automatically Generated Unique Topic Names

For TWiki applications it is useful to be able to automatically generate unique topic names, such as BugID0001, BugID0002, etc. You can add AUTOINC<n> to the topic name in the edit and save scripts, and it will be replaced with an auto-incremented number on topic save. <n> is a number starting from 0, and may include leading zeros. Leading zeros are used to zero-pad numbers so that auto-incremented topic names can sort properly. Deleted topics are not re-used to ensure uniqueness of topic names. That is, the auto-incremented number is always higher than the existing ones, even if there are gaps in the number sequence.

Examples:

• BugAUTOINC0 - creates topic names Bug0, Bug1, Bug2, ... (does not sort properly)
• ItemAUTOINC0000 - creates topic names Item0000, Item0001, Item0002, ... (sorts properly up to 9999)
• DocIDAUTOINC10001 - start with DocID10001, DocID10002, ... (sorts properly up to 99999; auto-links)

Characters after AUTOINC<n> are preserved, but are not taken into account when calculating the next increment. Use this to create topic names that have a unique identifier (serial number) and a descriptive text.

Example:

• BlogAUTOINC0001-my-first-blog - creates topic name Blog0001-my-first-blog
• BlogAUTOINC0001-my-crazy-cats - creates topic name Blog0002-my-crazy-cats
• BlogAUTOINC0001-fondue-recipe - creates topic name Blog0003-fondue-recipe

Example link to create a new topic:

[[%SCRIPTURLPATH{edit}%/%WEB%/BugIDAUTOINC00001?templatetopic=BugTemplate;topicparent=%TOPIC%;t=%SERVERTIME{"$day$hour$min$sec"}%][Create new item]]

Note: After the save operation, the web client is redirected to the newly created topic by default. If the specified topic name contains AUTOINC<n> and you want to redirect to a different URL containing the newly created topic's name, you can use AUTOINC in the redirectto parameter. Let's say the specified topic name is ItemAUTOINC0001, and redirectto is set to %SCRIPTURL{view}%/%WEB%/ViewerTopic?id=ItemAUTOINC. If the latest existing topic is Item0123, a new topic named Item0124 is created, and the web client is redirected to ViewerTopic?id=Item0124 in the current web.

Template Topics in Action

Here is an example for creating new topics (in the Sandbox web) based on a specific template topic and form:

The above form asks for a topic name. A hidden input tag named templatetopic specifies ExampleTopicTemplate as the template topic to use. Here is the raw text of the form:

%EDITFORMFIELD{ "new" type="start" action="edit" topic="Sandbox.%TOPIC%" }%
   * New example topic: 
     %EDITFORMFIELD{ "topic" type="text" value="ExampleTopicAUTOINC0001" size="30" }%
     %EDITFORMFIELD{ "templatetopic" type="hidden" value="%SYSTEMWEB%.ExampleTopicTemplate" }%
     %EDITFORMFIELD{ "topicparent" type="hidden" value="%HOMETOPIC%" }%
     %EDITFORMFIELD{ "onlywikiname" type="hidden" value="on" }%
     %EDITFORMFIELD{ "onlynewtopic" type="hidden" value="on" }%
     %EDITFORMFIELD{ "form" type="submit" value="Create" }%
%EDITFORMFIELD{ "form" type="end" }%

Here is the equivalent form using a hand-crafted HTML form:

<form name="new" action="%SCRIPTURLPATH{edit}%/Sandbox/%HOMETOPIC%">
   * New example topic: 
     <input type="text" name="topic" value="ExampleTopicAUTOINC0001" size="30" />
     <input type="hidden" name="templatetopic" value="%SYSTEMWEB%.ExampleTopicTemplate" />
     <input type="hidden" name="topicparent" value="%HOMETOPIC%" />
     <input type="hidden" name="onlywikiname" value="on" />
     <input type="hidden" name="onlynewtopic" value="on" />
     <input type="submit" class="twikiSubmit" value="Create" />
</form>

Note: You can create a topic in one step, without going through the edit screen. To do that, specify the save script instead of the edit script in the form action. When you specify the save script in an HTML form tag you have to use the "post" method. This is done automatically when using the EDITFORMFIELD variable. Example when using the HTML form tag:

<form name="new" action="%SCRIPTURLPATH{save}%/Sandbox/" method="post">
    ...
</form>

The edit and save scripts understand many more parameters, see TWikiScripts and TWikiScripts for details.

TIP: You can use the %WIKIUSERNAME% and %DATE% variables in your topic templates to include the signature of the person creating a new topic. The variables are expanded into fixed text when a new topic is created. The standard signature is:
-- %WIKIUSERNAME% - %DATE%

Using Absolute vs Relative URLs in Templates

When you use TWikiVariables such as %PUBURL% and %PUBURLPATH% in templates you should be aware that using %PUBURL% instead of %PUBURLPATH% puts absolute URLs in the produced HTML. This means that when a user saves a TWiki page in HTML and emails the file to someone outside a company firewall, the receiver has a severe problem viewing it. It is therefore recommended always to use the %PUBURLPATH% to refer to images, CSS, Javascript files etc so links become relative. This way browsers just give up right away and show a usable html file.

Related Topics: TWikiSkins, TWikiForms, TWikiScripts, DeveloperDocumentationCategory, AdminDocumentationCategory

Back to top

TWiki Skins

A skin overlays regular templates to provide specific look and feel to TWiki screens.

Overview

TWiki uses TWikiTemplates files as the basis of all the screens it uses to interact with users. Each screen has an associated template file that contains the basic layout of the screen. This is then filled in by the code to generate what you see in the browser.

TWiki ships with a default set of template files that give a very basic, CSS-themable, look-and-feel. TWiki also includes support for skins that can be selected to give different, more sophisticated, look and feel. A default TWiki installation will usually start up with the PatternSkin already selected. Skins may also be defined by third parties and loaded into a TWiki installation to give more options. To see how TWiki looks when no skin is selected, view the current page with a non-existing skin.

TWiki topic content is not affected by the choice of skin, however a skin can be defined to use a CSS (Cascading Style Sheet) which can provide a radically different appearance to the text layout.

Relevant links on TWiki.org:

• TWiki:TWiki.TWikiSkinsSupplement - tip: supplemental documentation on TWiki skins
• TWiki:Plugins.SkinPackage - list of all contributed skin packages
• TWiki:Plugins.SkinDevelopment - discussion and feedback on contributed skins
• TWiki:Plugins.SkinBrainstorming - open forum for new skin ideas
• TWiki:Plugins.SkinPackageHowTo - template to create a new skin package

See other types of extensions: TWikiAddOns, TWikiContribs, TWikiPlugins

Changing the default TWiki skin

TWiki ships with the TopMenuSkin activated by default. You can set a skin for the whole site, a single web, a single topic, or for each user individually. This is done by setting the SKIN preferences setting to the name of a skin. If the skin you select doesn't exist, then TWiki will pick up the default templates. For example, to make the SKIN setting work across all topics and webs, put it in TWikiPreferences.

Skins can cascade using a skin path explained below. One skin can be based on another one, and extensions can introduce additional screen elements. For example, the TagMePlugin adds tag elements to the TopMenuSkin, and the TopMenuSkin is based on the PatternSkin, resulting in this skin path:

   * Set SKIN = tagme, topmenu, pattern

Defining Skins

You may want to define your own skin, for example to comply with corporate web guidelines, or because you have a aesthetic vision that you want to share. There are a couple of places you can start doing this.

The TWikiTemplates files used for skins are located in the twiki/templates directory and are named according to the skin: <scriptname>.<skin>.tmpl. Skin files may also be defined in TWiki topics - see TWikiTemplates for details.

To start creating a new skin, copy the default TWikiTemplates (like view.tmpl), or copy an existing skin to use as a base for your own skin. You should only need to copy the files you intend to customize, as TWiki can be configured to fall back to another skin if a template is not defined in your skin. Name the files as described above (for example view.myskin.tmpl).

If you use PatternSkin as your starting point, and you want to modify the layout, colors or even the templates to suit your own needs, have a look first at the topics PatternSkinCustomization and PatternSkinCssCookbook.

For your own TWiki skin we encourage you to show a small TWiki logo at the bottom of your skin:

<a href="http://twiki.org/"><img src="%PUBURL%/%SYSTEMWEB%/TWikiLogos/T-badge-88x31.gif" alt="This site is powered by the TWiki Enterprise Collaboration Platform" width="88" height="31" title="This site is powered by the TWiki Enterprise Collaboration Platform" border="0" /></a>

Renders as:

Note: TWiki.org has no marketing budget, e.g. we rely on TWiki users to spread the word of TWiki. You can support the open source project by adding logos that point back to TWiki.org, and by mentioning TWiki in social media.

The standard TWiki skins show the logo in the %WEBCOPYRIGHT% variable.

Note: Two skin names have reserved meanings; text skin, and skin names starting with rss have hard-coded meanings.

The following template files are used for TWiki screens, and are referenced in the TWiki core code. If a skin doesn't define its own version of a template file, then TWiki will fall back to the next skin in the skin path, or finally, to the default version of the template file.

(Certain template files are expected to provide certain TMPL:DEFs - these are listed in sub-bullets)

• addform - used to select a new form for a topic
• attachagain - used when refreshing an existing attachment
• attachnew - used when attaching a new file to a topic
• attachtables - defines the format of attachments at the bottom of the standard topic view
  • ATTACH:files:footer, ATTACH:files:header, ATTACH:files:row, ATTACH:versions:footer, ATTACH:versions:header, ATTACH:versions:row
• changeform - used to change the form in a topic
• changes - used by the changes script
• edit - used for the edit screen
• form
• formtables - used to defined the format of forms
  • FORM:display:footer, FORM:display:header, FORM:display:row
• login - used for loggin in when using the TemplateLoginManager
  • LOG_IN, LOG_IN_BANNER, LOG_OUT, LOGGED_IN_BANNER, NEW_USER_NOTE, UNRECOGNISED_USER
• moveattachment - used when moving an attachment
• oopsaccessdenied - used to format Access Denied messages
  • no_such_topic, no_such_web, only_group, topic_access
• oopsattention - used to format Attention messages
  • already_exists, bad_email, bad_ver_code, bad_wikiname, base_web_missing, confirm, created_web, delete_err, invalid_web_color, invalid_web_name, in_a_group, mandatory_field, merge_notice, missing_action, missing_fields, move_err, missing_action, no_form_def, no_users_to_reset, notwikiuser, oversized_upload, password_changed, password_mismatch, problem_adding, remove_user_done, rename_err, rename_not_wikiword, rename_topic_exists, rename_web_err, rename_web_exists, rename_web_prerequisites, reset_bad, reset_ok, save_error, send_mail_error, thanks, topic_exists, unrecognized_action, upload_name_changed, web_creation_error, web_exists, web_missing, wrong_password, zero_size_upload
• oopschangelanguage - used to prompt for a new language when internationalisation is enabled
• oopsgeneric - a basic dialog for user information; provides "ok" button only
• oopslanguagechanged - used to confirm a new language when internationalisation is enabled
• oopsleaseconflict - used to format lease Conflict messages
  • lease_active, lease_old
• preview - used for previewing edited topics before saving
• rdiff - used for viewing topic differences
• registernotify - used by the user registration system
• registernotifyadmin - used by the user registration system
• rename - used when renaming a topic
• renameconfirm - used when renaming a topic
• renamedelete - used when renaming a topic
• renameweb - used when renaming a web
• renamewebconfirm - used when renaming a web
• renamewebdelete - used when renaming a web
• searchbookview - used to format inline search results in book view
• searchformat - used to format inline search results
• search - used by the search CGI script
• settings
• view - used by the view CGI script
• viewprint - used to create the printable view